IEC TS 60536-2:1992
Collections
International IEC standards
Publication date
August 1992
Number of pages
37 p.
Reference
IEC TS 60536-2:1992
Print number
1
IEC TS 60536-2:1992
August 1992
Technical specification
Cancelled
Classification of electrical and electronic equipment with regard to protection against electric shock - Part 2: Guidelines to requirements for protection against electric shock
Contains details of protective provisions against electric shock for both direct and indirect contact. It has been prepared for electrical equipment with rated voltages not exceeding 1 000 V a.c. with a rated frequency not exceeding 1 000 Hz or 1 500 V d.c. Technical committees may, however, consider the possibility of using this report for equipment operating at higher voltages and higher frequencies. This report provides technical committees with guidelines for the practical implementation of the principles laid down in IEC 60536 for protection against electric shock when specifying requirements for protective provisions applicable to their equipment. Has the status of a type 2 technical report.Has the status of a basic safety publication in accordance with IEC Guide 104.
Main informations
See more
See less
Sumary
Classification of electrical and electronic equipment with regard to protection against electric shock - Part 2: Guidelines to requirements for protection against electric shock
Contains details of protective provisions against electric shock for both direct and indirect contact. It has been prepared for electrical equipment with rated voltages not exceeding 1 000 V a.c. with a rated frequency not exceeding 1 000 Hz or 1 500 V d.c. Technical committees may, however, consider the possibility of using this report for equipment operating at higher voltages and higher frequencies. This report provides technical committees with guidelines for the practical implementation of the principles laid down in IEC 60536 for protection against electric shock when specifying requirements for protective provisions applicable to their equipment. Has the status of a type 2 technical report. Has the status of a basic safety publication in accordance with IEC Guide 104.
Contains details of protective provisions against electric shock for both direct and indirect contact. It has been prepared for electrical equipment with rated voltages not exceeding 1 000 V a.c. with a rated frequency not exceeding 1 000 Hz or 1 500 V d.c. Technical committees may, however, consider the possibility of using this report for equipment operating at higher voltages and higher frequencies. This report provides technical committees with guidelines for the practical implementation of the principles laid down in IEC 60536 for protection against electric shock when specifying requirements for protective provisions applicable to their equipment. Has the status of a type 2 technical report. Has the status of a basic safety publication in accordance with IEC Guide 104.
See more
Voir moins
Standard replaced by
(1)
IEC 61140:1997
November 1997
International standard
Cancelled
Protection against electric shock - Common aspects for installation and equipment
Applies to the protection of persons and animals against ELECTRIC SHOCK, giving fundamental principles and requirements which are common to electrical installations, systems and EQUIPMENT or necessary for their coordination. Prepared for installations, systems and EQUIPMENT having nominal or rated voltages not exceeding a.c. 1 000 V or d.c. 1 500 V. It may be used as guidance for higher voltages generated inside EQUIPMENT but it does not apply to high-voltage distribution systems. Has the status of a basic safety publication in accordance with IEC Guide 104.
Need to identify, monitor and decipher standards?
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ