ISO 12151-3:2021

ISO 12151-3:2021

October 2021
International standard Current

Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

This document specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 76 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162‑1 and ISO 6162‑2.Note 1      Materials other than carbon steel can be supplied as agreed between the manufacturer and user.Note 2      For hose fittings used in hydraulic and pneumatic braking systems on road vehicles (as defined in the scope of ISO/TC 22/SC 2, Road vehicles), see ISO 4038, ISO 4039‑1 and ISO 4039‑2.These hose fittings are for use in hydraulic fluid power systems with a hose that meets the requirements of the respective hose standards and in general applications with suitable hoses.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

October 2021

Number of pages

12 p.

Reference

ISO 12151-3:2021

ICS Codes

23.100.40   Piping and couplings
23.040.70   Hoses and hose assemblies

Print number

1
Sumary
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

This document specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 76 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162‑1 and ISO 6162‑2.

Note 1      Materials other than carbon steel can be supplied as agreed between the manufacturer and user.

Note 2      For hose fittings used in hydraulic and pneumatic braking systems on road vehicles (as defined in the scope of ISO/TC 22/SC 2, Road vehicles), see ISO 4038, ISO 4039‑1 and ISO 4039‑2.

These hose fittings are for use in hydraulic fluid power systems with a hose that meets the requirements of the respective hose standards and in general applications with suitable hoses.

Replaced standards (1)
ISO 12151-3:2010
June 2010
International standard Cancelled
Connections for hydraulic fluid power and general use - Hose fittings - Part 3 : hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

ISO 12151-3:2010 specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 51 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162-1 and ISO 6162-2. Materials other than carbon steel can be supplied as agreed between the manufacturer and user. These fittings are used in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards and in general applications with suitable hoses.

Standard replaced by (1)
ISO 12151-3:2010
June 2010
International standard Cancelled
Connections for hydraulic fluid power and general use - Hose fittings - Part 3 : hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

ISO 12151-3:2010 specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 51 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162-1 and ISO 6162-2. Materials other than carbon steel can be supplied as agreed between the manufacturer and user. These fittings are used in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards and in general applications with suitable hoses.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ