This International Standard specifies a method for the direct determination of water in petroleum products boilingbelow 390 °C. It covers the mass fraction range 0,003 % (m/m) to 0,100%(m/m). It is not applicable to productscontaining ketones or to residual fuel oils.This International Standard may be applicable to lubricating base oils. However, the precision has not beenestablished for these materials.The precision given in clause 12 is based upon data obtained using dual-cell, dual-electrolyte systems.NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactionsinterfere in the determination of water by Karl Fischer titration. In petroleum products, the most common interferences arehydrogen sulfide and mercaptan sulfur, however, mass fractions of these below 0,003 % (m/m) as sulfur will not causesignificant interference over the range 0,003 % (m/m) to 0,100%(m/m) water. Other organic sulfur compounds commonlypresent such as sulfides, disulphides and thiophenes, do not interfere.NOTE 2 An alternative procedure is provided for information in annex B for the direct determination of water over the range0,003 % (V/V) to 0,100 % (V/V) in petroleum products. The limitations under which this alternative volume measurement may beused are listed in annex B.NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the massand volume fraction of a material respectively.
This International Standard specifies a method for the direct determination of water in petroleum products boiling
below 390 °C. It covers the mass fraction range 0,003 % (m/m) to 0,100%(m/m). It is not applicable to products
containing ketones or to residual fuel oils.
This International Standard may be applicable to lubricating base oils. However, the precision has not been
established for these materials.
The precision given in clause 12 is based upon data obtained using dual-cell, dual-electrolyte systems.
NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactions
interfere in the determination of water by Karl Fischer titration. In petroleum products, the most common interferences are
hydrogen sulfide and mercaptan sulfur, however, mass fractions of these below 0,003 % (m/m) as sulfur will not cause
significant interference over the range 0,003 % (m/m) to 0,100%(m/m) water. Other organic sulfur compounds commonly
present such as sulfides, disulphides and thiophenes, do not interfere.
NOTE 2 An alternative procedure is provided for information in annex B for the direct determination of water over the range
0,003 % (V/V) to 0,100 % (V/V) in petroleum products. The limitations under which this alternative volume measurement may be
used are listed in annex B.
NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass
and volume fraction of a material respectively.
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ