ISO 13165-3:2024

ISO 13165-3:2024

December 2024
International standard Current

Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-ray spectrometry

This document specifies a method to determine radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-ray spectrometry (see ISO 20042[7]).The method covers the measurement of soluble 226Ra activity concentrations greater than 0,002 Bq·l−1 using a sample volume of up to 100 l of any water type.For water samples with a volume of less than a volume of 1 l, direct gamma-ray spectrometry can be performed following ISO 10703 but with a higher detection limit. The typical detection limit for samples of 1 l to 5 l is in the range of 0,002 to 0,000 40 Bq·l−1[8].NOTE            This test method can be adapted to determine other naturally occurring isotopes of radium, such as 223Ra, 224Ra and 228Ra, if the respective ingrowth periods are taken into account.

View the extract
Main informations

Collections

International ISO standards

Publication date

December 2024

Number of pages

15 p.

Reference

ISO 13165-3:2024

ICS Codes

13.060.60   Examination of physical properties of water
17.240   Radiation measurements

Print number

1
Sumary
Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-ray spectrometry

This document specifies a method to determine radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-ray spectrometry (see ISO 20042[7]).

The method covers the measurement of soluble 226Ra activity concentrations greater than 0,002 Bq·l−1 using a sample volume of up to 100 l of any water type.

For water samples with a volume of less than a volume of 1 l, direct gamma-ray spectrometry can be performed following ISO 10703 but with a higher detection limit. The typical detection limit for samples of 1 l to 5 l is in the range of 0,002 to 0,000 40 Bq·l−1[8].

NOTE            This test method can be adapted to determine other naturally occurring isotopes of radium, such as 223Ra, 224Ra and 228Ra, if the respective ingrowth periods are taken into account.

Replaced standards (1)
ISO 13165-3:2016
March 2016
International standard Cancelled
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3). The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type. For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit. NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ