ISO 13577-2:2023

ISO 13577-2:2023

December 2023
International standard Current

Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems

This document specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines.NOTE            The general safety requirements common to TPE are provided in ISO 13577-1:2016. ISO 13577-1:2016, Annex B also includes a list of processes for which industrial furnaces and heating systems covered by the ISO 13577 series are used.This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex A, when used as intended and under the conditions for use as described in the instruction handbook.This document covers:—     fuel pipework downstream of and including the manual isolating valve;—     combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;—     burner(s), burner system and ignition device;—     functional requirements for safety related control system.This document applies to any oxidation of gaseous and liquid fuels with air or other gases containing free oxygen to release thermal energy in TPE. Annex B includes examples of gaseous and liquid fuels.For thermal or catalytic post combustion and waste incineration, this document applies only to auxiliary burners designed to start-up and/or support the process.The pressure hazard of the piping and components covered by this document is within the maximum pressure/size relationship of category I as specified in Annex C.This document also gives the necessary requirements regarding information for use.This document does not cover hazards from heating generated by electricity.This document does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.This document is not applicable to combustion and fuel handling systems:—     of gas welding and allied processes;—     up-stream of the TPE manual isolating valve.This document is not applicable to industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines manufactured before the date of its publication.This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.

View the extract
Main informations

Collections

International ISO standards

Thematics

Gestion des risques et SST, Sécurité, QSE

Publication date

December 2023

Number of pages

103 p.

Reference

ISO 13577-2:2023

ICS Codes

25.180.01   Industrial furnaces in general
13.100   Occupational safety. Industrial hygiene

Print number

1
Sumary
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems

This document specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines.

NOTE            The general safety requirements common to TPE are provided in ISO 13577-1:2016. ISO 13577-1:2016, Annex B also includes a list of processes for which industrial furnaces and heating systems covered by the ISO 13577 series are used.

This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex A, when used as intended and under the conditions for use as described in the instruction handbook.

This document covers:

     fuel pipework downstream of and including the manual isolating valve;

     combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;

     burner(s), burner system and ignition device;

     functional requirements for safety related control system.

This document applies to any oxidation of gaseous and liquid fuels with air or other gases containing free oxygen to release thermal energy in TPE. Annex B includes examples of gaseous and liquid fuels.

For thermal or catalytic post combustion and waste incineration, this document applies only to auxiliary burners designed to start-up and/or support the process.

The pressure hazard of the piping and components covered by this document is within the maximum pressure/size relationship of category I as specified in Annex C.

This document also gives the necessary requirements regarding information for use.

This document does not cover hazards from heating generated by electricity.

This document does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.

This document is not applicable to combustion and fuel handling systems:

     of gas welding and allied processes;

     up-stream of the TPE manual isolating valve.

This document is not applicable to industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines manufactured before the date of its publication.

This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.

This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.

Replaced standards (1)
ISO 13577-2:2014
September 2014
International standard Cancelled
Industrial furnaces and associated processing equipment - Safety - Part 2 : combustion and fuel handling systems

ISO 13577-2:2014 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE). It deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems, when used as intended and under the conditions foreseen by the manufacturer. ISO 13577-2:2014 covers: fuel pipework downstream of and including the manual isolating valve; combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system; burner(s), burner system and ignition device; functional requirements for safety related control system. It applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE. For thermal or catalytic post combustion and waste incineration, ISO 13577-2:2014 applies only to auxiliary burners designed to start-up and/or support the process. ISO 13577-2:2014 also gives the necessary requirements regarding information for use.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ