ISO 14469:2017

ISO 14469-1:2004 specifies CNG refuelling nozzles and receptacles constructed entirely of new and unused parts and materials, for road vehicles powered by compressed natural gas. A CNG refuelling connector consists of, as applicable, the receptacle and its protective cap (mounted on the vehicle) and the nozzle. ISO 14469-1:2004 is applicable only to such devices designed for a service pressure of 20 MPa (200 bar), identified by the code B200, to those using CNG in accordance with ISO 15403 and having standardized mating components, and to connectors that prevent natural gas vehicles from being fuelled by dispenser stations with service pressures higher than that of the vehicle, while allowing them to be fuelled by stations with service pressures less than or equal to the vehicle fuel system service pressure.

ISO 14469-2:2007 applies to compressed natural gas (CNG) vehicle nozzles and receptacles, constructed entirely of new, unused parts and materials for which there is a demand, in particular for large CNG urban buses of refuelling times equivalent to those of urban buses driven by conventional diesel engines. The proposed connector, size 2, offers a larger cross section than the connector in accordance with ISO 14469-1 and, therefore, permits refuelling of the vehicles within significantly shorter time periods. Studies have shown that the proposed connector, size 2, offers more than twice the mass flow of the connectors specified in ISO 14469-1. CNG fuelling connection nozzles consist of the following components, as applicable: receptacle and protective cap (mounted on vehicle); nozzle. ISO 14469-2:2007 applies only to devices which have a service pressure of 20 MPa. ISO 14469-2:2007 applies to devices with standardized mating components. ISO 14469-2:2007 applies to connectors which prevent natural gas vehicles from being fuelled by dispenser stations with service pressures higher than the vehicle, and allow natural gas vehicles to be fuelled by dispenser stations with service pressures equal to or lower than the vehicle fuel system service pressure. ISO 14469-2:2007 is applicable to compressed natural gas in accordance with ISO 15403.

ISO 14469-3:2006 applies to compressed natural gas (CNG) vehicle nozzles and receptacles constructed entirely of new, unused parts and materials. CNG fuelling connection nozzles consist of the following components, as applicable: receptacle and protective cap (mounted on vehicle);nozzle. ISO 14469-3:2006 applies to devices which have a service pressure of 250 bar and refers only to a service pressure of 250 bar. This part of ISO 14469 applies to devices with standardized mating components and applies to connectors which: prevent natural gas vehicles from being fuelled by dispenser stations with service pressures higher than that of the vehicle;allow natural gas vehicles to be fuelled by dispenser stations with service pressures equal to or lower than the vehicle fuel system service pressure. ISO 14469-3:2006 is applicable to compressed natural gas in accordance with ISO 15403.