ISO 15002:2023
Flow control devices for connection to a medical gas supply system
This document specifies requirements for flow control devices that can be connected by the user either directly, by means of a probe or a gas-specific connector, or indirectly by means of a low-pressure hose assembly conforming with ISO 5359 to:a) a terminal unit conforming with ISO 9170-1 of a medical gas pipeline system conforming with ISO 7396-1:2016;b) the pressure outlet of a regulator conforming with ISO 10524-1:2018; orc) to the pressure outlet of a valve integrated pressure regulator (VIPR) conforming with ISO 10524-3 (see 5.2 gas inlets).This document applies to the following types of flow control devices (FCDs):a) flowmeters;b) flowgauge FCDs; andc) fixed orifice FCDs.NOTE Flow control devices that are classed as medical electrical equipment can be subject to additional requirements of IEC 60601-1.This document applies to flow control devices for the following gases:— oxygen;— oxygen 93 %;— nitrous oxide;— medical air;— carbon dioxide;— oxygen/nitrous oxide mixture 50/50 (% volume fraction);— oxygen-enriched air;— helium;— xenon; and— specified mixtures of the gases listed above.NOTE Flow control devices can be available for other gases.This document does not apply to flow control devices that are:a) for use with gases for driving surgical tools;b) an integral part of a regulator (see ISO 10524-1:2018); orc) an integral part of a valve with integrated pressure regulator (VIPR) (see ISO 10524-3).
This document specifies requirements for flow control devices that can be connected by the user either directly, by means of a probe or a gas-specific connector, or indirectly by means of a low-pressure hose assembly conforming with ISO 5359 to:
a) a terminal unit conforming with ISO 9170-1 of a medical gas pipeline system conforming with ISO 7396-1:2016;
b) the pressure outlet of a regulator conforming with ISO 10524-1:2018; or
c) to the pressure outlet of a valve integrated pressure regulator (VIPR) conforming with ISO 10524-3 (see 5.2 gas inlets).
This document applies to the following types of flow control devices (FCDs):
a) flowmeters;
b) flowgauge FCDs; and
c) fixed orifice FCDs.
NOTE Flow control devices that are classed as medical electrical equipment can be subject to additional requirements of IEC 60601-1.
This document applies to flow control devices for the following gases:
— oxygen;
— oxygen 93 %;
— nitrous oxide;
— medical air;
— carbon dioxide;
— oxygen/nitrous oxide mixture 50/50 (% volume fraction);
— oxygen-enriched air;
— helium;
— xenon; and
— specified mixtures of the gases listed above.
NOTE Flow control devices can be available for other gases.
This document does not apply to flow control devices that are:
a) for use with gases for driving surgical tools;
b) an integral part of a regulator (see ISO 10524-1:2018); or
c) an integral part of a valve with integrated pressure regulator (VIPR) (see ISO 10524-3).
ISO 15002:2008 is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases; flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators. ISO 15002:2008 is applicable to: flow-metering devices intended to be used with the following medical gases: oxygen; nitrous oxide; medical air; carbon dioxide; oxygen/nitrous oxide mixture [50 %/50 % (by volume)] specified mixtures of the gases listed above; flow-metering devices intended to be used with the following gases: oxygen-enriched air; helium; xenon.
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ