ISO 16773-2:2016

ISO 16773-2:2016

April 2016
International standard Current

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2 : collection of data

ISO 16773-2:2016 gives guidelines for optimizing the collection of EIS data with focus on high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than 109 Ω⋅cm2. This does not preclude measurements on systems with lower impedance. For uncoated samples extra information can be found in ISO/TR 16208.ISO 16773-2:2016 deals with the following:- instrumental set-up: requirements and pit-falls;- data validation: checking the measurement range and the accuracy of the data;- performing an EIS measurement: specimen considerations and instrumental parameters;- the experimental results: different methods of presenting EIS data.These guidelines are intended to ensure the acquisition of EIS data that can be used to study the performance of the specimen. This part of ISO 16773 does not give guidelines for the interpretation of the data.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

April 2016

Number of pages

24 p.

Reference

ISO 16773-2:2016

ICS Codes

87.040   Paints and varnishes

Print number

1
Sumary
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2 : collection of data

ISO 16773-2:2016 gives guidelines for optimizing the collection of EIS data with focus on high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than 109 Ω⋅cm2. This does not preclude measurements on systems with lower impedance. For uncoated samples extra information can be found in ISO/TR 16208.

ISO 16773-2:2016 deals with the following:

- instrumental set-up: requirements and pit-falls;

- data validation: checking the measurement range and the accuracy of the data;

- performing an EIS measurement: specimen considerations and instrumental parameters;

- the experimental results: different methods of presenting EIS data.

These guidelines are intended to ensure the acquisition of EIS data that can be used to study the performance of the specimen. This part of ISO 16773 does not give guidelines for the interpretation of the data.

Replaced standards (1)
ISO 16773-2:2007
April 2007
International standard Cancelled
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2 : collection of data

ISO 16773-2:2007 provides guidance on optimizing the collection of EIS data from high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than 109 ohm·cm2. This does not preclude measurements on systems with lower impedance. ISO 16773-2:2007 deals with instrumental set-up: requirements and pit-falls; data validation: checking the measurement range and the accuracy of the data; performing an EIS measurement: specimen considerations and instrumental parameters; the experimental results: different methods of presenting EIS data. It does not give guidelines for the interpretation of the data.

Standard replaced by (1)
ISO 16773-2:2007
April 2007
International standard Cancelled
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2 : collection of data

ISO 16773-2:2007 provides guidance on optimizing the collection of EIS data from high-impedance systems. High impedance in the context of intact coatings refers to systems with an impedance greater than 109 ohm·cm2. This does not preclude measurements on systems with lower impedance. ISO 16773-2:2007 deals with instrumental set-up: requirements and pit-falls; data validation: checking the measurement range and the accuracy of the data; performing an EIS measurement: specimen considerations and instrumental parameters; the experimental results: different methods of presenting EIS data. It does not give guidelines for the interpretation of the data.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ