ISO 17641-2:2015

ISO 17641-2:2015

October 2015
International standard Current

Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 : self-restraint tests

ISO 17641-2:2015 specifies the required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests.The following tests are described:- T-joint weld cracking test;- weld metal tensile test;- longitudinal bend test.The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.ISO 17641-2:2015 applies primarily to fully austenitic stainless steels, nickel, nickel base, and nickel copper weld metals. This part of ISO 17641 can also be used for other weld metals.ISO 17641-2:2015 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

October 2015

Number of pages

13 p.

Reference

ISO 17641-2:2015

ICS Codes

25.160.40   Welded joints and welds

Print number

1
Sumary
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 : self-restraint tests

ISO 17641-2:2015 specifies the required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests.

The following tests are described:

- T-joint weld cracking test;

- weld metal tensile test;

- longitudinal bend test.

The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.

ISO 17641-2:2015 applies primarily to fully austenitic stainless steels, nickel, nickel base, and nickel copper weld metals. This part of ISO 17641 can also be used for other weld metals.

ISO 17641-2:2015 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

Replaced standards (1)
ISO 17641-2:2005
March 2005
International standard Cancelled
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 : self-restraint tests

ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: T-joint weld cracking test;weld metal tensile test;longitudinal bend test. The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials. This International Standard applies primarily to fully austenitic stainless steels; nickel, nickel-base and nickel-copper weld metals. It can also be used for other weld metals. ISO 17641-2:2005 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

Standard replaced by (1)
ISO 17641-2:2005
March 2005
International standard Cancelled
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 : self-restraint tests

ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: T-joint weld cracking test;weld metal tensile test;longitudinal bend test. The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials. This International Standard applies primarily to fully austenitic stainless steels; nickel, nickel-base and nickel-copper weld metals. It can also be used for other weld metals. ISO 17641-2:2005 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ