ISO 25649-7:2024

ISO 25649-7:2024

October 2024
International standard Current

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices

This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.Class E devices are intended for use in bathing areas or in protected and safe shore zones.NOTE 1        Typical products forming Class E (see Annex F):—      inflatable boats for rowing or paddling of near oval shape with or without transom;—      canoes and kayaks;—      inflatable boats made from plastic sheets or from reinforced materials;—      motor kit/sail kit as additional option.NOTE 2        Typical applications of Class E devices:—      moving from one place to another for pleasure purposes;—      staying on the water for relaxing;—      moving from shore to the main boat, transportation of persons and load (tender boat).

View the extract
Main informations

Collections

International ISO standards

Publication date

October 2024

Number of pages

25 p.

Reference

ISO 25649-7:2024

ICS Codes

97.220.40   Outdoor and water sports equipment

Print number

1
Sumary
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices

This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.

This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.

Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.

Class E devices are intended for use in bathing areas or in protected and safe shore zones.

NOTE 1        Typical products forming Class E (see Annex F):

      inflatable boats for rowing or paddling of near oval shape with or without transom;

      canoes and kayaks;

      inflatable boats made from plastic sheets or from reinforced materials;

      motor kit/sail kit as additional option.

NOTE 2        Typical applications of Class E devices:

      moving from one place to another for pleasure purposes;

      staying on the water for relaxing;

      moving from shore to the main boat, transportation of persons and load (tender boat).

Replaced standards (1)
ISO 25649-7:2017
August 2017
International standard Cancelled
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices

ISO 25649-7:2017 is applicable for Class E floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. ISO 25649-7:2017 is applicable with ISO 25649‑1 and ISO 25649‑2. Class E devices are intended for use in bathing areas or in protected and safe shore zones. NOTE 1 Typical products forming Class E (see Annex F): - inflatable boats for rowing or paddling of near oval shape with or without transom; - canoes and kayaks; - inflatable boats made from plastic sheets or from reinforced materials; - motor kit/sail kit as additional option. NOTE 2 Typical places for application of Class E devices: - moving from A to B for pleasure purposes; - staying on the water for relaxing; - moving from shore to the main boat, transportation of persons and load (tender boat).

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ