ISO 5629:2017
Paper and board - Determination of bending stiffness - Resonance method
ISO 5629:2017 specifies a method for the determination of bending stiffness using the resonance method. This method gives only a single result for each test piece tested, although in general, bending stiffness values may depend on which surface of the material forms the inner surface of the arc resulting from bending forces. The bending stiffness of a very wide range of papers and boards can be measured using this method. However, for some materials, such as those listed below, the measured numerical values will not be strictly identical with bending stiffness as defined in 3.1: a) multi-ply papers and boards in which the component plies can move separately during a test; b) papers and boards with appreciable curl, especially if the axis of the curl is in the long direction of the test piece; c) some soft papers with grammage below about 40 g/m2. This method is not applicable to corrugated boards.
ISO 5629:2017 specifies a method for the determination of bending stiffness using the resonance method.
This method gives only a single result for each test piece tested, although in general, bending stiffness values may depend on which surface of the material forms the inner surface of the arc resulting from bending forces.
The bending stiffness of a very wide range of papers and boards can be measured using this method. However, for some materials, such as those listed below, the measured numerical values will not be strictly identical with bending stiffness as defined in 3.1:
a) multi-ply papers and boards in which the component plies can move separately during a test;
b) papers and boards with appreciable curl, especially if the axis of the curl is in the long direction of the test piece;
c) some soft papers with grammage below about 40 g/m2.
This method is not applicable to corrugated boards.
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ