ISO 6162-1:2012

ISO 6162-1:2012

December 2012
International standard Current

Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

ISO 6162-1:2012 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at pressures of 3,5 MPa (35 bar ) to 35 MPa (350 bar). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.ISO 6162-1:2012 also recognizes the need to accommodate metric screw fasteners (type 1), as well as to provide a means to use existing inch screw fasteners (type 2).These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.Surges of pressure higher than the nominal ratings will reduce the ability of the flange connections to retain the hydraulic fluid. This needs to be taken into account in the design of the hydraulic system.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

December 2012

Number of pages

21 p.

Reference

ISO 6162-1:2012

ICS Codes

23.100.40   Piping and couplings

Print number

1 - 07/01/2013
Sumary
Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

ISO 6162-1:2012 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at pressures of 3,5 MPa (35 bar ) to 35 MPa (350 bar). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.

ISO 6162-1:2012 also recognizes the need to accommodate metric screw fasteners (type 1), as well as to provide a means to use existing inch screw fasteners (type 2).

These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.

Surges of pressure higher than the nominal ratings will reduce the ability of the flange connections to retain the hydraulic fluid. This needs to be taken into account in the design of the hydraulic system.

Replaced standards (2)
ISO 6162-1:2002
December 2002
International standard Cancelled
Hydraulic fluid power - Flange connectors with split or once-piece flange clamps and metric or inch screws - Part 1 : flange connectors for us at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

ISO 6162-1/AC1:2004
November 2004
International standard Cancelled
Technical corrigendum 1 to standard ISO 6162-1:2002

Standard replaced by (2)
ISO 6162-1:2002
December 2002
International standard Cancelled
Hydraulic fluid power - Flange connectors with split or once-piece flange clamps and metric or inch screws - Part 1 : flange connectors for us at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

ISO 6162-1/AC1:2004
November 2004
International standard Cancelled
Technical corrigendum 1 to standard ISO 6162-1:2002

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ