ISO 6195:2021

ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. ISO 6195:2013 is applicable to the following five housing designs. Type A: recessed housings with undercut or separate cover to retain elastomeric wipers. Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing. Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement). Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers. Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).

ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. ISO 6195:2013 is applicable to the following five housing designs. Type A: recessed housings with undercut or separate cover to retain elastomeric wipers. Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing. Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement). Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers. Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).