ISO 898-5:2012

ISO 898-5:2012

June 2012
International standard Current

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5 : set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread

ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range. Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only. ISO 898-5:2012 is applicable to set screws and similar fasteners: made of carbon steel or alloy steel, having a triangular ISO metric screw thread according to ISO 68-1, with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2, with diameter/pitch combinations according to ISO 261 and ISO 262, and having thread tolerances according to ISO 965-1 and ISO 965-2.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

June 2012

Number of pages

15 p.

Reference

ISO 898-5:2012

ICS Codes

21.060.10   Bolts, screws, studs

Print number

1 - 11/06/2012
Sumary
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5 : set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread

ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.

Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.

ISO 898-5:2012 is applicable to set screws and similar fasteners:

  • made of carbon steel or alloy steel,
  • having a triangular ISO metric screw thread according to ISO 68-1,
  • with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
  • with diameter/pitch combinations according to ISO 261 and ISO 262, and
  • having thread tolerances according to ISO 965-1 and ISO 965-2.
Replaced standards (1)
ISO 898-5:1998
August 1998
International standard Cancelled
Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fadteners not under tensile stresses.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ