This document specifies the fundamental deviations and limits of sizes for the pitch and minor diameters of ISO general purpose metric internal threads (M) conforming to ISO 262 (M6 to M68 with the coarse pitches and M72 to M100 with pitch 6) having basic and design profiles in accordance with ISO 68-1.This document is applicable to the metric internal threads oversized to tolerance class 6AZ or 6AX to mate with the hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing.This document is not applicable to internal threads with coating on thread surface. The limits of sizes before coating are decided by agreement between manufacturer and purchaser.
This document specifies the fundamental deviations and limits of sizes for the pitch and minor diameters of ISO general purpose metric internal threads (M) conforming to ISO 262 (M6 to M68 with the coarse pitches and M72 to M100 with pitch 6) having basic and design profiles in accordance with ISO 68-1.
This document is applicable to the metric internal threads oversized to tolerance class 6AZ or 6AX to mate with the hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing.
This document is not applicable to internal threads with coating on thread surface. The limits of sizes before coating are decided by agreement between manufacturer and purchaser.
This part of ISO 965 specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to ISO 262 having basic profile according to ISO 68-1. Internal screw threads according to this part of ISO 965 are intended to mate with external screw threads with maximum size of tolerance position h before hot-dip galvanizing. The limits of sizes for the tolerance quality specified are derived from tolerances specified in ISO 965-1. The fundamental deviations for internal screw threads with a tolerance position AZ have been calculated according to the following formula: EIAZ = + (300 + 20P) Where EI is expressed in micrometers. P is expressed in millimeters. The fundamental deviations for internal screw threads with a tolerance position AX have been calculated according to the following formula: EIAX = + (220P - 20) Where EI is expressed in micrometers; P is expressed in millimeters. Products made with thread tolerances according to this part of ISO 965 may show load failure when tested in accordance with ISO 898-2 without adjustment of the other mechanical properties. Internal screw threads with thread tolerances according to this part of ISO 965 must not be mated with external screw threads having thread tolerances according to ISO 965-4 because such combinations will create severe risk of thread stripping. NOTE Internal screw threads with tolerance class 6AZ are primarily intended to mate with external screw threads centrifuged after hot-dip galvanizing. Internal screw threads with tolerance class 6AX are primarily intended to mate with hot-dip galvanized external screw threads with heavy coating not centrifuged.
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ