ISO/IEC 11574:2000

ISO/IEC 11574:2000

March 2000
International standard Current

Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows

This International Standard specifies the service description and control aspects, including functional capabilities andinformation flows, of standardised circuit-mode bearer services which may be supported by a Private Integrated ServicesNetwork (PISN).This International Standard includes the following basic services:_ Circuit-mode 64 kbit/s unrestricted 8 kHz structured bearer service category;_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for speech information transfer;_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for 3,1 kHz audio information transfer.A PISN shall support at least one of the above three bearer services to conform with this International Standard.The scope of this International Standard does not include:_ the negotiation of service at call establishment time,_ the change of service during a call, and_ unidirectional services.This International Standard includes optional procedures for the provision of functions equivalent to the following public ISDNsupplementary services: Subaddress and Multiple Subscriber Number.NOTE 1 - Supplementary services and other bearer services which can be used in conjunction with 64 kbit/s circuit switched bearer servicesspecified in this International Standard are dealt with in other standards.NOTE 2 - Service specifications are based on information concerning the corresponding public ISDN service available at the time ofpublication of this International Standard.NOTE 3 - ITU-T treat Subaddressing and Multiple Subscriber Number as supplementary services.NOTE 4 - The use of the Direct Dial In supplementary service of a public ISDN for calls incoming to a PISN from a public ISDN is regardedas part of the basic services in a PISN.NOTE 5 - The use of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services of apublic ISDN for obtaining the Originating Number or the Connected Number of a call from or to a public ISDN is regarded as part of thebasic services in a PISN.NOTE 6 - The provision (either explicitly or implicitly) by the user to the network, of its own number (Originating Number or ConnectedNumber), and the provision of an Originating Number or a Connected Number by a PISN to another network is a part of the basic services ina PISN and not a part of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services.Those supplementary services are concerned only with the presentation of the number from the network to the served PISN user.

View the extract
Main informations

Collections

International ISO standards

Publication date

March 2000

Number of pages

87 p.

Reference

ISO/IEC 11574:2000

ICS Codes

33.040.35   Telephone networks

Print number

1 - 21/06/2000
Sumary
Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows

This International Standard specifies the service description and control aspects, including functional capabilities and

information flows, of standardised circuit-mode bearer services which may be supported by a Private Integrated Services

Network (PISN).

This International Standard includes the following basic services:

_ Circuit-mode 64 kbit/s unrestricted 8 kHz structured bearer service category;

_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for speech information transfer;

_ Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for 3,1 kHz audio information transfer.

A PISN shall support at least one of the above three bearer services to conform with this International Standard.

The scope of this International Standard does not include:

_ the negotiation of service at call establishment time,

_ the change of service during a call, and

_ unidirectional services.

This International Standard includes optional procedures for the provision of functions equivalent to the following public ISDN

supplementary services: Subaddress and Multiple Subscriber Number.

NOTE 1 - Supplementary services and other bearer services which can be used in conjunction with 64 kbit/s circuit switched bearer services

specified in this International Standard are dealt with in other standards.

NOTE 2 - Service specifications are based on information concerning the corresponding public ISDN service available at the time of

publication of this International Standard.

NOTE 3 - ITU-T treat Subaddressing and Multiple Subscriber Number as supplementary services.

NOTE 4 - The use of the Direct Dial In supplementary service of a public ISDN for calls incoming to a PISN from a public ISDN is regarded

as part of the basic services in a PISN.

NOTE 5 - The use of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services of a

public ISDN for obtaining the Originating Number or the Connected Number of a call from or to a public ISDN is regarded as part of the

basic services in a PISN.

NOTE 6 - The provision (either explicitly or implicitly) by the user to the network, of its own number (Originating Number or Connected

Number), and the provision of an Originating Number or a Connected Number by a PISN to another network is a part of the basic services in

a PISN and not a part of the Calling Line Identification Presentation and Connected Line Identification Presentation supplementary services.

Those supplementary services are concerned only with the presentation of the number from the network to the served PISN user.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ