ISO/TS 20065:2022

ISO/TS 20065:2022

December 2022
Technical specification Current

Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method

This document describes a method for the objective determination of the audibility of tones in environmental noise.This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.NOTE      The procedure has not been validated below 50 Hz.The method presented herein can be used in continuous measurement stations that work automatically.

View the extract
Main informations

Collections

International ISO standards

Thematics

Sécurité, QSE, Gestion des risques et SST

Publication date

December 2022

Number of pages

33 p.

Reference

ISO/TS 20065:2022

ICS Codes

13.140   Noise with respect to human beings
17.140.01   Acoustic measurements and noise abatement in general

Print number

1
Sumary
Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

Replaced standards (1)
ISO/PAS 20065:2016
July 2016
Publicly available specification Cancelled
Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method

ISO/PAS 20065:2016 describes a method for the objective determination of the audibility of tones in environmental noise. It is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are to be captured, then this method cannot replace subjective evaluation. The method presented herein can be used in continuous measurement stations that work automatically.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ