NF EN 288-5

NF EN 288-5

November 1994
Standard Cancelled

Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.

Le présent document spécifie les conditions de qualification d'un mode opératoire de soudage par utilisation de produits consommables de soudage agréés pour le soudage à l'arc, et donne le domaine de validité de la qualification ainsi que sa durée.

See more
Main informations

Collections

National standards and national normative documents

Publication date

November 1994

Number of pages

11 p.

Reference

NF EN 288-5

ICS Codes

25.160.10   Welding processes

Classification index

A89-010-5

Print number

1 - 01/11/1994
Sumary
Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.

Le présent document spécifie les conditions de qualification d'un mode opératoire de soudage par utilisation de produits consommables de soudage agréés pour le soudage à l'arc, et donne le domaine de validité de la qualification ainsi que sa durée.
Standard replaced by (1)
NF EN ISO 15610
May 2004
Standard Cancelled
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables

ISO 15610:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on tested consumables. In addition, it gives the range of qualification. ISO 15610:2003 applies to arc and gas welding but other fusion welding processes may be accepted if specified. It is limited to application to parent metals that produce acceptable micro structures and properties in the heat affected zone and which do not deteriorate significantly in service. This International Standard is not applicable where requirements for hardness or impact properties, preheating, controlled heat input, interpass temperature and post-weld heat-treatment are specified for the welded joint. The use of ISO 15610.2003 may also be restricted by an application standard or a specification.

Table of contents
  • Avant-propos
    3
  • 0 Introduction
    4
  • 1 Domaine d'application
    4
  • 2 Références normatives
    5
  • 3 Définitions
    5
  • 4 Descriptifs de modes opératoires de soudage préliminaires (DMOS-p)
    5
  • 5 Qualification du mode opératoire de soudage
    5
  • 6 Domaine de validité
    6
  • 6.1 Généralités
    6
  • 6.2 Par rapport au constructeur
    6
  • 6.3 Par rapport au matériau
    6
  • 6.4 Commun à tous les procédés de soudage
    7
  • 6.5 Pour un groupe particulier de procédés
    7
  • 7 Durée de validité
    8
  • 8 Documentation
    8
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ