NF EN ISO 10304-1

NF EN ISO 10304-1

July 2009
Standard Current mandatory application standard
  • Consult online for free
  • Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here

Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1 : determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate

ISO 10304-1:2007 specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, e.g. drinking water, ground water, surface water, waste water, leachates and marine water by liquid chromatography of ions. The lower limit of application is greater than or equal to 0,05 mg/l for bromide and for nitrite, and greater than or equal to 0,1 mg/l for chloride, fluoride, nitrate, orthophosphate, and sulfate. The lower limit of application depends on the matrix and the interferences encountered.The working range may be expanded to lower concentrations (e.g. greater than or equal to 0,01 mg/l) if an appropriate pre‑treatment of the sample (e.g. conditions for trace analyses, pre‑concentration technique) is applied, and/or if an UV detector (for bromide, nitrate and nitrite) is used.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2009

Number of pages

26 p.

Reference

NF EN ISO 10304-1

ICS Codes

13.060.30   Sewage water
13.060.50   Examination of water for chemical substances

Classification index

T90-042-1

Print number

1 - 18/06/2009

International kinship

ISO 10304-1:2007

European kinship

EN ISO 10304-1:2009
Sumary
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1 : determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate

ISO 10304-1:2007 specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, e.g. drinking water, ground water, surface water, waste water, leachates and marine water by liquid chromatography of ions.

The lower limit of application is greater than or equal to 0,05 mg/l for bromide and for nitrite, and greater than or equal to 0,1 mg/l for chloride, fluoride, nitrate, orthophosphate, and sulfate. The lower limit of application depends on the matrix and the interferences encountered.

The working range may be expanded to lower concentrations (e.g. greater than or equal to 0,01 mg/l) if an appropriate pre‑treatment of the sample (e.g. conditions for trace analyses, pre‑concentration technique) is applied, and/or if an UV detector (for bromide, nitrate and nitrite) is used.

Replaced standards (2)
NF EN ISO 10304-1
June 1995
Standard Cancelled
Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions - Part 1 : method for water with low contamination

NF EN ISO 10304-2
September 1996
Standard Cancelled
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2 : determination of bromide, chloride, nitrate, nitite, orthophosphate and sulfate in waste water

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Interférences
    2
  • 4 Principe
    2
  • 5 Réactifs
    3
  • 6 Appareillage
    5
  • 7 Échantillon et prétraitement de l'échantillon
    7
  • 8 Mode opératoire
    8
  • 9 Calcul
    9
  • 10 Expression des résultats
    9
  • 11 Rapport d'essai
    10
  • Annexe A (informative) Données de performance
    11
  • Annexe B (informative) Interférences vérifiées
    15
  • Bibliographie
    16
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ