NF EN ISO 10426-1

NF EN ISO 10426-1

February 2007
Standard Cancelled

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification

ISO 10426-1:2005 specifies requirements and gives recommendations for eight classes of well cements, including their chemical and physical requirements and procedures for physical testing.ISO 10426-1:2005 is applicable to well cement classes A, B, C, D, E and F, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of classes D, E and F.ISO 10426-1:2005 is also applicable to well cement classes G and H, which are the products obtained by grinding Portland cement clinker with no additives other than calcium sulfate or water.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2007

Number of pages

48 p.

Reference

NF EN ISO 10426-1

ICS Codes

75.020   Extraction and processing of petroleum and natural gas
91.100.10   Cement. Gypsum. Lime. Mortar

Classification index

M87-301-1

Print number

1 - 23/01/2007

International kinship

ISO 10426-1:2005

European kinship

EN ISO 10426-1:2006
Sumary
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification

ISO 10426-1:2005 specifies requirements and gives recommendations for eight classes of well cements, including their chemical and physical requirements and procedures for physical testing.

ISO 10426-1:2005 is applicable to well cement classes A, B, C, D, E and F, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of classes D, E and F.

ISO 10426-1:2005 is also applicable to well cement classes G and H, which are the products obtained by grinding Portland cement clinker with no additives other than calcium sulfate or water.

Replaced standards (2)
NF EN ISO 10426-1
December 2001
Standard Cancelled
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification

La présente partie de l'ISO 10426 traite des exigences et des recommandations relatives aux huit classes de ciments pour puits. Elle comprend les exigences chimiques et physiques, ainsi que les modes opératoires d'essais physiques. La présente partie de l'ISO 10426 s'applique aux classes de ciments pour puits A, B, C, D, E et F qui sont des produits obtenus par broyage d'un clinker de ciment Portland, additionnés, si nécessaire, de sulfate de calcium. Des additions de traitement peuvent être utilisées dans la fabrication de ciment de ces classes. Les additifs adaptés peuvent être soit broyés, soit mélangés pour la fabrication des ciments de classe D, E et F. La présente partie de l'ISO 10426 s'applique également aux classes G et H qui sont des produits obtenus en broyant un clinker de ciment Portland sans aucune addition autre que du sulfate de calcium ou de l'eau.

NF EN ISO 10426-1/A1
December 2003
Standard Cancelled
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specifications

Cet amendement apporte des modifications correctives d'ordre mineur sur le texte de la norme internationale ISO 10426-1.

Standard replaced by (1)
NF EN ISO 10426-1
August 2012
Standard Current
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification

ISO 10426-1:2009 specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing. ISO 10426-1:2009 is applicable to well cement classes A, B, C and D, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of class D cement. ISO 10426-1:2009 is also applicable to well cement classes G and H, which are the products obtained by grinding clinker with no additives other than one or more forms of calcium sulfate, water or chemical additives as required for chromium (VI) reduction.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences
    3
  • 4.1 Spécifications, exigences chimiques et physiques
    3
  • 4.2 Fréquence d'échantillonnage, programmation des essais et équipement
    8
  • 5 Échantillonnage
    9
  • 6 Essais de finesse
    9
  • 6.1 Méthode
    9
  • 6.2 Exigences
    9
  • 7 Préparation du laitier pour les essais de fluide libre, de résistance à la compression et du temps de pompabilité
    10
  • 7.1 Appareillage
    10
  • 7.2 Mode opératoire
    11
  • 8 Test du fluide libre (eau libre)
    11
  • 8.1 Appareillage
    11
  • 8.2 Étalonnage
    16
  • 8.3 Mode opératoire
    17
  • 8.4 Calcul du pourcentage de fluide libre
    17
  • 8.5 Exigences d'acceptation
    18
  • 9 Essais de résistance à la compression
    18
  • 9.1 Appareillage
    18
  • 9.2 Mode opératoire
    19
  • 9.3 Mode opératoire d'essai (à partir de l'ASTM C 109)
    21
  • 9.4 Critères d'acceptation de la résistance à la compression
    21
  • 10 Test du temps de pompabilité
    22
  • 10.1 Appareillage
    22
  • 10.2 Étalonnage
    28
  • 10.3 Mode opératoire
    31
  • 10.4 Temps de pompabilité et consistance
    36
  • 10.5 Exigences d'acceptation relatives aux spécifications
    36
  • 11 Marquage
    36
  • 12 Conditionnement
    37
  • 13 Bentonite
    37
  • Annexe A (informative) Procédure d'étalonnage des thermocouples, des systèmes de mesurage de la température et des régulateurs
    38
  • Bibliographie
    40
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ