NF EN ISO 10438-1

NF EN ISO 10438-1

December 2009
Standard Current

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : general requirements

ISO 10438-1:2007 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers.ISO 10438-1:2007 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2009

Number of pages

73 p.

Reference

NF EN ISO 10438-1

ICS Codes

75.100   Lubricants, industrial oils and related products
75.180.20   Processing equipment

Classification index

M87-230-1

Print number

1 - 29/12/2009

International kinship

ISO 10438-1:2007

European kinship

EN ISO 10438-1:2007
Sumary
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : general requirements

ISO 10438-1:2007 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers.

ISO 10438-1:2007 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.

Replaced standards (1)
NF EN ISO 10438-1
July 2004
Standard Cancelled
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : general requirements

ISO 10438-1:2003 specifies general requirements for lubrication, shaft-sealing and control-oil systems and auxiliaries for use in the petroleum, petrochemical and natural gas industries. It is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate. ISO 10438 in its entirety specifies requirements for lubrication systems, oil-type shaft-sealing systems, self-acting gas seal systems, control-oil systems and other auxiliaries for general- or special-purpose applications. These systems can serve equipment such as compressors, gears, pumps and drivers. None of the parts of ISO 10438 is applicable to internal combustion engines.

Table of contents
  • Avant-propos
    v
  • Introduction
    VI
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, abréviations et définitions
    2
  • 3.1 Termes et définitions
    2
  • 3.2 Abréviations
    8
  • 4 Généralités
    10
  • 4.1 Dimensions et unités
    10
  • 4.2 Conception
    10
  • 4.3 Sélection de système
    11
  • 4.4 Code de calcul pour la pression
    11
  • 4.5 Conception de base
    11
  • 4.6 Soudage
    11
  • 4.7 Exigences obligatoires
    12
  • 4.8 Exigences de documentation
    12
  • 5 Tuyauterie
    12
  • 5.1 Généralités
    12
  • 5.2 Tuyauterie d'huile
    19
  • 5.3 Tuyauterie et tubage d'instruments
    19
  • 5.4 Tuyauterie d'exploitation
    20
  • 5.5 Réfrigérants intermédiaires et réfrigérants complémentaires
    20
  • 6 Systèmes d'instrumentation, de commande et électriques
    21
  • 6.1 Généralités
    21
  • 6.2 Systèmes d'alarme, d'arrêt et de commande
    21
  • 6.3 Instrumentation
    24
  • 6.4 Systèmes électriques
    30
  • 7 Examen, essais et préparation à l'expédition
    31
  • 7.1 Généralités
    31
  • 7.2 Examen
    32
  • 7.3 Essais
    34
  • 7.4 Préparation de l'expédition
    35
  • 8 Données du vendeur
    37
  • 8.1 Généralités
    37
  • 8.2 Propositions
    38
  • 8.3 Données contractuelles
    39
  • Annexe A (informative) Feuilles de données
    42
  • Annexe B (informative) Symboles
    43
  • Annexe C (informative) Exigences relatives aux plans et aux données fournies par le vendeur (VDDR)
    45
  • Annexe D (informative) Essais de performances des filtres à huile ou à gaz et de propreté du système à huile
    49
  • Annexe E (informative) Spécifications internationales des matériaux
    61
  • Annexe F (informative) Explication des niveaux de réservoir
    62
  • Bibliographie
    64
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ