NF EN ISO 10893-10

NF EN ISO 10893-10

May 2011
Standard Current

Non destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

ISO 10893-10:2011 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded [except submerged arc-welded (SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections.In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of the manufacturer.For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of ISO 10893-10:2011 can be applied to detect imperfections having other orientations.ISO 10893-10:2011 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5.It can also be applicable to the testing of circular hollow sections.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2011

Number of pages

20 p.

Reference

NF EN ISO 10893-10

ICS Codes

77.040.20   Non-destructive testing of metals
77.140.75   Steel pipes and tubes for specific use

Classification index

A49-785-10

Print number

1 - 13/05/2011

International kinship

ISO 10893-10:2011

European kinship

EN ISO 10893-10:2011
Sumary
Non destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

ISO 10893-10:2011 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded [except submerged arc-welded (SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections.

In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of the manufacturer.

For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of ISO 10893-10:2011 can be applied to detect imperfections having other orientations.

ISO 10893-10:2011 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5.

It can also be applicable to the testing of circular hollow sections.

Replaced standards (2)
NF EN 10246-6
August 2000
Standard Cancelled
Non-destructive testing of steel tubes - Part 6 : Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections

Le présent document spécifie les prescriptions relatives au contrôle automatique par ultrasons, avec ondes de cisaillement, sur toute la surface des tubes sans soudure pour la détection d'imperfections transversales.

NF EN 10246-7
January 2006
Standard Cancelled
Non-destructive testing of steel tubes - Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections

Le présent document spécifie les prescriptions relatives au contrôle automatique par ultrasons, avec ondes de cisaillement (y compris la technique "phased array") et ondes de Lamb, sur la totalité de la circonférence des tubes en acier sans soudure et soudés, à l'exception des tubes soudés à l'arc immergé sous flux en poudre (SAW), pour la détection des imperfections longitudinales.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences générales
    3
  • 5 Méthode de contrôle
    3
  • 6 Étalons de référence
    4
  • 6.1 Généralités
    4
  • 6.2 Types d'entailles de référence
    4
  • 6.3 Dimensions des entailles de référence
    5
  • 7 Étalonnage et vérification de l'équipement
    6
  • 7.1 Généralités
    6
  • 7.2 Réglage du seuil de déclenchement et d'alarme
    6
  • 7.3 Vérification de l'étalonnage et réétalonnage
    7
  • 8 Acceptation
    7
  • 9 Rapport de contôle
    8
  • Annexe A (normative) Contrôle des imperfections longitudinales de tubes ayant un rapport diamètre extérieur spécifié/moyenne de plage d'épaisseur spécifiée inférieur à 5
    9
  • Annexe B (normative) Contrôle manuel/semi-automatisé des extrémités non contrôlées et des zones douteuses
    11
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ