NF EN ISO 11148-9

NF EN ISO 11148-9

February 2012
Standard Current

Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders

ISO 11148-9:2011 specifies safety requirements for hand-held non-electric power tools fitted with collets (hereinafter "die grinders") intended for grinding and surface finishing and chamfering using mounted points, burrs and files and small wire brushes and other accessories mounted on shanks. The die grinders can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-9:2011 is applicable to angle die grinders, reciprocating files, rotary files and straight die grinders. ISO 11148-9:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to die grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of die grinders in potentially explosive atmospheres.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2012

Number of pages

35 p.

Reference

NF EN ISO 11148-9

ICS Codes

25.080.50   Grinding and polishing machines
25.140.10   Pneumatic tools
25.140.99   Other hand-held tools

Classification index

E65-100-9

Print number

1 - 17/02/2012

International kinship

ISO 11148-9:2011

European kinship

EN ISO 11148-9:2011
Sumary
Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders

ISO 11148-9:2011 specifies safety requirements for hand-held non-electric power tools fitted with collets (hereinafter "die grinders") intended for grinding and surface finishing and chamfering using mounted points, burrs and files and small wire brushes and other accessories mounted on shanks. The die grinders can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

ISO 11148-9:2011 is applicable to angle die grinders, reciprocating files, rotary files and straight die grinders.

ISO 11148-9:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to die grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of die grinders in potentially explosive atmospheres.

Replaced standards (1)
NF EN 792-9+A1
November 2008
Standard Cancelled
Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders

Le présent document fait partie d'une série de normes destinées à respecter les exigences essentielles de sécurité et de santé relatives à la conception et à la construction des machines portatives non électriques. Il énumère les risques significatifs engendrés par les meuleuses d'outillage et spécifie les prescriptions correspondantes. Il vient à l'appui des Directives "Machines" 98/37/CE et 2006/42/CE.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    2
  • 3.1 Termes et définitions généraux
    2
  • 3.2 Termes et définitions relatifs aux meuleuses d'outillage
    4
  • 4 Exigences de sécurité et/ou mesures de prévention
    4
  • 4.1 Généralités
    4
  • 4.2 Sécurité mécanique
    5
  • 4.3 Sécurité thermique
    5
  • 4.4 Réduction du bruit
    5
  • 4.5 Vibrations
    6
  • 4.6 Matériaux et produits traités, utilisés ou dégagés
    7
  • 4.7 Ergonomie
    7
  • 4.8 Commandes
    7
  • 5 Vérification
    8
  • 5.1 Conditions générales des essais
    8
  • 5.2 Bruit
    8
  • 5.3 Vibrations
    8
  • 5.4 Démarrage intempestif
    9
  • 5.5 Fabrication de la machine
    9
  • 5.6 Structure de vérification
    9
  • 6 Informations pour l'utilisation
    10
  • 6.1 Marquage, signes et avertissements écrits
    10
  • 6.2 Notice d'instructions
    10
  • 6.3 Instructions de fonctionnement
    17
  • 6.4 Données
    17
  • 6.5 Instructions pour la maintenance
    18
  • Annexe A (informative) Liste des phénomènes dangereux significatifs
    19
  • Annexe B (informative) Exemples de meuleuses d'outillage couvertes par la présente partie de l'ISO 11148
    21
  • Annexe C (normative) Symboles pour étiquettes et signes
    22
  • Annexe D (informative) Exemples de produits abrasifs pour meuleuses d'outillage
    23
  • Bibliographie
    24
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ