NF EN ISO 11553-1

NF EN ISO 11553-1

April 2020
Standard Current

Safety of machinery - Laser processing machines - Part 1 : laser safety requirements

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.This document is applicable to machines using laser radiation to process materials.It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications:— photolithography;— stereolithography;— holography;— medical applications (per IEC 60601-2-22);— data storage.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Thematics

Sécurité, Gestion des risques et SST, QSE

Publication date

April 2020

Number of pages

35 p.

Reference

NF EN ISO 11553-1

ICS Codes

13.280   Radiation protection
31.260   Optoelectronics. Laser equipment

Classification index

E60-601-1

Print number

1

International kinship

ISO 11553-1:2020

European kinship

EN ISO 11553-1:2020
Sumary
Safety of machinery - Laser processing machines - Part 1 : laser safety requirements

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).

Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.

This document is applicable to machines using laser radiation to process materials.

It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications:

— photolithography;

— stereolithography;

— holography;

— medical applications (per IEC 60601-2-22);

— data storage.

Replaced standards (1)
NF EN ISO 11553-1
February 2009
Standard Cancelled
Safety of machinery - Laser processing machines - Part 1 : general safety requirements

ISO 11553-1:2005 describes hazards generated by laser processing machines, and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturers of such equipment. Requirements dealing with noise as a hazard from laser processing machines are not included in ISO 11553-1:2005. They will be included in a subsequent amendment. ISO 11553-1:2005 is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications: photolithography, stereolithography, holography, medical applications and data storage.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Phénomènes dangereux générés par les rayonnements laser
  • 5 Exigences et mesures de sécurité
  • 6 Vérification des exigences de sécurité et des mesures de réduction du risque
  • 7 Information pour l'utilisation
  • 8 Étiquetage
  • Annexe A (informative) Phénomènes dangereux potentiels
  • Annexe ZA (informative) Relation entre la présente Norme européenne et les exigences essentielles concernées de la Directive 2006/42/CE
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ