NF EN ISO 11681-2

NF EN ISO 11681-2

May 2009
Standard Cancelled

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 : chain-saws for tree service

ISO 11681-2:2006 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and dismantling standing tree crowns.It gives methods for the elimination or reduction of hazards arising from the use of the chain-saws. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. The environmental aspects, except for noise, have not been considered.The chain-saws covered are designed to be operated with the right hand on the rear handle and the left hand on the front handle by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). ISO 11681-2:2006 is not applicable to chain-saws manufactured before its date of publication.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2009

Number of pages

37 p.

Reference

NF EN ISO 11681-2

ICS Codes

65.060.80   Forestry equipment

Classification index

U34-109

Print number

1 - 14/04/2009

International kinship

ISO 11681-2:2006

European kinship

EN ISO 11681-2:2008
Sumary
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 : chain-saws for tree service

ISO 11681-2:2006 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and dismantling standing tree crowns.

It gives methods for the elimination or reduction of hazards arising from the use of the chain-saws. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.

It deals with all significant hazards. The environmental aspects, except for noise, have not been considered.

The chain-saws covered are designed to be operated with the right hand on the rear handle and the left hand on the front handle by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE).

ISO 11681-2:2006 is not applicable to chain-saws manufactured before its date of publication.

Replaced standards (1)
NF EN ISO 11681-2
September 2006
Standard Cancelled
Forestry machinery - Portable chain-saw safety requirements and testing - Part 2 : chain-saws for tree service

ISO 11681-2:2006 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and dismantling standing tree crowns. It gives methods for the elimination or reduction of hazards arising from the use of the chain-saws. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. The environmental aspects, except for noise, have not been considered. The chain-saws covered are designed to be operated with the right hand on the rear handle and the left hand on the front handle by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). ISO 11681-2:2006 is not applicable to chain-saws manufactured before its date of publication.

Standard replaced by (1)
NF EN ISO 11681-2
February 2012
Standard Cancelled
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 : chain-saws for tree service

ISO 11681-2:2011 gives safety requirements and measures for their verification for the design and construction for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass, without guide bar or saw chain and with tanks empty, of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling standing tree crowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. ISO 11681-2:2011 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Liste des phénomènes dangereux
    4
  • 5 Exigences de sécurité et vérification
    4
  • 5.1 Généralités
    4
  • 5.2 Poignées
    5
  • 5.3 Protection des mains
    5
  • 5.4 Équilibre et couple de retenue
    6
  • 5.5 Protection contre les blessures dues au phénomène de rebond
    7
  • 5.6 Enrouleur de chaîne
    7
  • 5.7 Griffe d'abattage
    8
  • 5.8 Évacuation des copeaux
    8
  • 5.9 Protecteur du guide-chaîne
    8
  • 5.10 Commande d'accélérateur
    8
  • 5.11 Dispositif d'arrêt du moteur
    9
  • 5.12 Protection contre le contact avec les parties sous haute tension
    9
  • 5.13 Embrayage
    10
  • 5.14 Réglage du carburateur
    10
  • 5.15 Protection contre le contact avec les parties chaudes
    10
  • 5.16 Gaz d'échappement
    11
  • 5.17 Graissage de la chaîne
    11
  • 5.18 Ouvertures des réservoirs
    11
  • 5.19 Tension de la chaîne
    11
  • 5.20 Dispositif d'attache
    12
  • 5.21 Vibrations
    12
  • 5.22 Bruit
    12
  • 6 Informations pour l'utilisation
    13
  • 6.1 Notice d'instructions
    13
  • 6.2 Marquage
    16
  • 6.3 Avertissements
    16
  • Annexe A (informative) Pictogrammes
    18
  • Annexe B (informative) Travail avec les scies à chaîne pour l'élagage des arbres à l'aide d'un filin et d'un harnais
    19
  • Bibliographie
    25
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ