NF EN ISO 13165-3

NF EN ISO 13165-3

February 2020
Standard Cancelled

Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit.NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2020

Number of pages

24 p.

Reference

NF EN ISO 13165-3

ICS Codes

13.060.60   Examination of physical properties of water
17.240   Radiation measurements

Classification index

M60-811-3

Print number

1

International kinship

ISO 13165-3:2016

European kinship

EN ISO 13165-3:2020
Sumary
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).

The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.

For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit.

NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

Replaced standards (1)
NF ISO 13165-3
June 2017
Standard Cancelled
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3). The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type. For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit. NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

Standard replaced by (1)
NF EN ISO 13165-3
December 2024
Standard Current
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-ray spectrometry

This document specifies a method to determine radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-ray spectrometry (see ISO 20042[7]). The method covers the measurement of soluble 226Ra activity concentrations greater than 0,002 Bq·l−1 using a sample volume of up to 100 l of any water type. For water samples with a volume of less than a volume of 1 l, direct gamma-ray spectrometry can be performed following ISO 10703 but with a higher detection limit. The typical detection limit for samples of 1 l to 5 l is in the range of 0,002 to 0,000 40 Bq·l−1[8]. NOTE            This test method can be adapted to determine other naturally occurring isotopes of radium, such as 223Ra, 224Ra and 228Ra, if the respective ingrowth periods are taken into account.

Table of contents
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Principe du mesurage
  • 6 Réactifs et équipement
  • 7 Échantillonnage
  • 8 Modes opératoires
  • 9 Programme d'assurance qualité et de contrôle de la qualité
  • 10 Expression des résultats
  • 11 Expression des résultats
  • Annexe A L'uranium et sa chaîne de désintégration
  • Bibliographie
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ