NF EN ISO 13385-1

NF EN ISO 13385-1

September 2011
Standard Cancelled

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics

ISO 13385-1:2011 provides the most important design and metrological characteristics of callipers with analogue indication [vernier scale or circular scale (dial)] and with digital indication (digital display).

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2011

Number of pages

31 p.

Reference

NF EN ISO 13385-1

ICS Codes

17.040.30   Measuring instruments
17.040.40   Geometrical Product Specification (GPS)

Classification index

E11-085-1

Print number

1 - 24/08/2011

International kinship

ISO 13385-1:2011

European kinship

EN ISO 13385-1:2011
Sumary
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics

ISO 13385-1:2011 provides the most important design and metrological characteristics of callipers with analogue indication [vernier scale or circular scale (dial)] and with digital indication (digital display).

Replaced standards (1)
XP E11-091
December 1998
Standard Cancelled
Geometrical product specification (GPS). Callipers.

Le présent document définit complètement le produit "Pied à coulisse" puisqu'il en fixe les caractéristiques de fabrication, les caractéristiques métrologiques et les méthodes permettant de vérifier ces caractéristiques en qualification, en réception et en vérification périodique. La situation du présent document dans la matrice GPS est donnée en annexe C.

Standard replaced by (1)
NF EN ISO 13385-1
September 2019
Standard Current
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers

This document provides the most important design and metrological characteristics of callipers — with analogue indication: vernier scale or circular scale (dial), and — with digital indication: digital display.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Caractéristiques de conception
    2
  • 4.1 Conception générale et nomenclature
    2
  • 4.2 Dimensions
    4
  • 4.3 Types de dispositifs indicateurs
    4
  • 4.4 Faces de mesure
    7
  • 5 Caractéristiques métrologiques
    7
  • 5.1 Généralités
    7
  • 5.2 Effet de blocage du coulisseau
    7
  • 5.3 Erreur maximale d'indication (limitée par la MPE)
    7
  • 5.4 MPE et MPL pour un nombre de caractéristiques métrologiques
    8
  • 6 Indication dans la documentation du produit et dans les fiches techniques
    9
  • 7 Preuve de conformité à la spécification
    10
  • 7.1 Généralités
    10
  • 7.2 Étalons pour l'étalonnage des caractéristiques métrologiques
    10
  • 8 Marquage
    10
  • Annexe A (informative) Contrôles d'erreur
    11
  • Annexe B (informative) Conseil d'application
    14
  • Annexe C (informative) Exemples de différents types de pieds à coulisse
    15
  • Annexe D (informative) Exemples de types de mesurage
    16
  • Annexe E (informative) Fiche technique (exemple)
    17
  • Annexe F (informative) Étalonnage des caractéristiques métrologiques
    18
  • Annexe G (informative) Relation avec la matrice GPS
    19
  • Bibliographie
    21
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ