NF EN ISO 13736

NF EN ISO 13736

July 2013
Standard Cancelled

Determination of flash point - Abel closed-cup method

ISO 13736:2013 specifies a method for the determination of the manual and automated closed-cup flash point of combustible liquids having flash points between −30,0 °C to 75,0 °C . However, the precision given for this method is only valid for flash points in the range −8,5 °C to 75,0 °C.ISO 13736:2013 is not applicable to water-borne paints.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2013

Number of pages

35 p.

Reference

NF EN ISO 13736

ICS Codes

75.080   Petroleum products in general
75.160.20   Liquid fuels

Classification index

M07-011

Print number

1 - 15/07/2013

International kinship

ISO 13736:2013

European kinship

EN ISO 13736:2013
Sumary
Determination of flash point - Abel closed-cup method

ISO 13736:2013 specifies a method for the determination of the manual and automated closed-cup flash point of combustible liquids having flash points between −30,0 °C to 75,0 °C . However, the precision given for this method is only valid for flash points in the range −8,5 °C to 75,0 °C.

ISO 13736:2013 is not applicable to water-borne paints.

Replaced standards (1)
NF EN ISO 13736
December 2008
Standard Cancelled
Determination of flash point - Abel closed-cup method

ISO 13736:2008 specifies a method for the determination of the closed-cup flash point of combustible liquids having flash points between - 30,0 °C and 70,0 °C, inclusive. However, the precision given for this method is only valid for flash points in the range - 5,0 °C to 66,5 °C. ISO 13736:2008 is not applicable to water-borne paints, which can, however, be tested using ISO 3679.

Standard replaced by (1)
NF EN ISO 13736
April 2021
Standard Current
Determination of flash point - Abel closed-cup method

This document specifies a method for the determination of the manual and automated closed cup flash point of combustible liquids having flash points between –30,0 °C to 75,0 °C. However, the precision given for this method is only valid for flash points in the range −8,5 °C to 75,0 °C. This document is not applicable to water-borne paints. NOTE 1   Water borne paints can be tested using ISO 3679[1]. NOTE 2   See 9.1 for the importance of this test in avoiding loss of volatile materials. NOTE 3   Liquids containing halogenated compounds can give anomalous results. NOTE 4   The thermometer specified for the manual apparatus limits the upper test temperature to 70,0 °C. NOTE 5   See 13.1 for more specific information related to precision.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    1
  • 5 Produits et réactifs
    2
  • 6 Appareillage
    2
  • 7 Préparation de l'appareillage
    3
  • 7.1 Emplacement de l'appareillage
    3
  • 7.2 Nettoyage du vase d'essai
    3
  • 7.3 Examen de l'appareillage
    3
  • 7.4 Chauffage/Refroidissement
    3
  • 7.5 Vérification de l'appareillage
    4
  • 8 Échantillonnage
    4
  • 9 Manipulation des échantillons
    4
  • 9.1 Généralités
    4
  • 9.2 Stockage avant la réalisation de l'essai
    4
  • 9.3 Préparation des échantillons
    5
  • 10 Mode opératoire
    5
  • 11 Calculs
    6
  • 12 Expression des résultats
    6
  • 13 Fidélité
    7
  • 13.1 Généralités
    7
  • 13.2 Répétabilité, r
    7
  • 13.3 Reproductibilité, R
    7
  • 14 Rapport d'essai
    7
  • Annexe A (normative) Appareils Abel de détermination du point d'éclair
    9
  • Annexe B (normative) Mise en place et fixation des thermomètres du vase et du bain de chauffage dans leur bague
    17
  • Annexe C (normative) Spécifications des thermomètres
    19
  • Annexe D (informative) Vérification de l'appareillage
    21
  • Bibliographie
    25
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ