NF EN ISO 13927

NF EN ISO 13927

July 2015
Standard Cancelled

Plastics - Simple heat release test using a conical radiant heater and a thermopile detector

ISO 13927:2015 specifies a method suitable for the production control or product development purposes for assessing the heat release rate of essentially flat products exposed in the horizontal orientation to controlled levels of radiant heating with an external igniter. The heat release rate is determined by the use of a thermopile instead of the more accurate oxygen consumption techniques. The time to ignition (sustained flaming) is also measured in this test. Test specimen mass loss can also be measured optionally.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2015

Number of pages

32 p.

Reference

NF EN ISO 13927

ICS Codes

83.080.01   Plastics in general

Classification index

T51-831

Print number

1

International kinship

ISO 13927:2015

European kinship

EN ISO 13927:2015
Sumary
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector

ISO 13927:2015 specifies a method suitable for the production control or product development purposes for assessing the heat release rate of essentially flat products exposed in the horizontal orientation to controlled levels of radiant heating with an external igniter. The heat release rate is determined by the use of a thermopile instead of the more accurate oxygen consumption techniques. The time to ignition (sustained flaming) is also measured in this test. Test specimen mass loss can also be measured optionally.

Replaced standards (1)
NF EN ISO 13927
May 2003
Standard Cancelled
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector

Le présent document décrit une méthode adaptée au contrôle de la production ou au développement du produit permettant l'évaluation du débit calorifique de produits essentiellement exposés suivant une orientation horizontale à des niveaux contrôlés de chaleur rayonnante, avec un dispositif d'allumage externe.

Standard replaced by (1)
NF EN ISO 13927
September 2023
Standard Current
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector

This document specifies a method suitable for the production control or product development purposes for assessing the heat release rate of essentially flat products exposed in the horizontal orientation to controlled levels of radiant heating with an external igniter. The heat release rate is determined by the use of a thermopile instead of the more accurate oxygen consumption techniques. The time to ignition and sustained flaming are also measured in this test. The mass loss of the test specimen can also be measured optionally.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Principe
  • 6 Appareillage
  • 7 Aptitude du produit à l'essai
  • 8 Fabrication et préparation des éprouvettes
  • 9 Étalonnage
  • 10 Mode opératoire d'essai
  • 11 Fidélité
  • 12 Rapport d'essai
  • Annexe A (normative) Étalonnage du fluxmètre thermique
  • Annexe B (informative)Indications destinées aux opérateurs
  • Annexe C (informative)Mesurage de la perte de masse en cours d'essai
  • Annexe D (informative)Calcul du flux de chaleur critique utile pour l'allumage
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ