NF EN ISO 13934-1

NF EN ISO 13934-1

July 2013
Standard Current

Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method

ISO 13934-1:2013 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical, or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography).The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state.The method is restricted to the use of constant rate of extension (CRE) testing machines.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

July 2013

Number of pages

22 p.

Reference

NF EN ISO 13934-1

ICS Codes

59.080.30   Textile fabrics

Classification index

G07-129-1

Print number

1 - 17/06/2013

International kinship

ISO 13934-1:2013

European kinship

EN ISO 13934-1:2013
Sumary
Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method

ISO 13934-1:2013 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.

The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical, or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography).

The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state.

The method is restricted to the use of constant rate of extension (CRE) testing machines.

Replaced standards (1)
NF EN ISO 13934-1
June 1999
Standard Cancelled
Textiles. Tensile properties of fabrics. Part 1 : determination of maximum force and elongation at maximum force using the strip method.

Le présent document spécifie une méthode pour la détermination de la force maximale de traction et de l'allongement à la force maximale de traction des étoffes textiles, dite méthode sur bande.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    3
  • 5 Échantillonnage
    4
  • 6 Appareillage
    4
  • 6.1 Appareil à vitesse constante d'allongement (CRE)
    4
  • 7 Atmosphères de conditionnement et d'essai
    5
  • 8 Préparation des éprouvettes
    5
  • 8.1 Généralités
    5
  • 8.2 Dimensions
    5
  • 8.3 Préparation des éprouvettes
    5
  • 8.4 Éprouvettes pour essai au mouillé
    6
  • 9 Mode opératoire
    6
  • 9.1 Longueur d'essai
    6
  • 9.2 Vitesse d'extension ou d'allongement
    6
  • 9.3 Mise en place des éprouvettes
    7
  • 9.4 Essai
    7
  • 9.5 Essai sur éprouvettes humides
    8
  • 10 Calcul et expression des résultats
    8
  • 11 Rapport d'essai
    8
  • Annexe A (informative) Suggestion de mode d'échantillonnage
    10
  • Annexe B (informative) Emplacement des éprouvettes prélevées dans un échantillon pour laboratoire
    11
  • Bibliographie
    12
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ