NF EN ISO 13935-2

NF EN ISO 13935-2

May 2014
Standard Current

Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2 : determination of maximum force to seam rupture using the grab method

ISO 13935-2:2014 specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-2:2014 describes the method known as the grab test. The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It may be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns. The sewn fabrics may be obtained from previously sewn articles or may be prepared from fabric samples, as agreed by the parties interested in the results. This method is applicable to straight seams only and not to curved seams. The method is restricted to the use of constant rate of extension (CRE) testing machines.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2014

Number of pages

17 p.

Reference

NF EN ISO 13935-2

ICS Codes

59.080.30   Textile fabrics
61.020   Clothes

Classification index

G07-118-2

Print number

1

International kinship

ISO 13935-2:2014

European kinship

EN ISO 13935-2:2014
Sumary
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2 : determination of maximum force to seam rupture using the grab method

ISO 13935-2:2014 specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-2:2014 describes the method known as the grab test.

The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It may be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.

The sewn fabrics may be obtained from previously sewn articles or may be prepared from fabric samples, as agreed by the parties interested in the results.

This method is applicable to straight seams only and not to curved seams.

The method is restricted to the use of constant rate of extension (CRE) testing machines.

Replaced standards (1)
NF EN ISO 13935-2
June 1999
Standard Cancelled
Textiles. Seam tensible properties of fabrics and made-up textile articles. Part 2 : determination of maximum force to seam rupture using the grab method.

Le présent document spécifie une méthode pour la détermination de la force maximale de traction avant rupture des coutures des étoffes et articles textiles confectionnés, dite "méthode d'arrachement".

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Principe
    2
  • 5 Échantillonnage
    2
  • 6 Appareillage
    2
  • 7 Atmosphères de conditionnement et d'essai
    3
  • 8 Préparation des coutures et des éprouvettes
    4
  • 9 Mode opératoire
    5
  • 10 Calcul et expression des résultats
    6
  • 11 Rapport d'essai
    6
  • Annexe A (informative) Agencement des mâchoires pour l'essai d'arrachement
    8
  • Bibliographie
    9
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ