NF EN ISO 1452-2

NF EN ISO 1452-2

January 2010
Standard Current

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes

ISO 1452-2:2009 specifies the characteristics of solid-wall pipes made from unplasticized poly(vinyl chloride) (PVC?U) for piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to.In conjunction with ISO 1452-1 and ISO 1452-5, it is applicable to extruded PVC?U pipes without a socket and pipes with a socket (integral or not), intended to be used for the following:- water mains and services buried in the ground;- conveyance of water above ground for both outside and inside buildings;- buried and above ground drainage and sewerage under pressure.It is applicable to piping systems intended for the supply of water under pressure up to and including 25 °C (cold water) intended for human consumption and for general purposes as well as for waste water under pressure. It is also applicable to pipes for the conveyance of water and waste water up to and including 45 °C and to a range of pipe sizes and pressure classes. It gives requirements concerning colours.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2010

Number of pages

33 p.

Reference

NF EN ISO 1452-2

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems
91.140.80   Drainage systems

Classification index

T54-016-2

Print number

1 - 18/01/2010

International kinship

ISO 1452-2:2009

European kinship

EN ISO 1452-2:2009
Sumary
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes

ISO 1452-2:2009 specifies the characteristics of solid-wall pipes made from unplasticized poly(vinyl chloride) (PVC?U) for piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to.

In conjunction with ISO 1452-1 and ISO 1452-5, it is applicable to extruded PVC?U pipes without a socket and pipes with a socket (integral or not), intended to be used for the following:

- water mains and services buried in the ground;

- conveyance of water above ground for both outside and inside buildings;

- buried and above ground drainage and sewerage under pressure.

It is applicable to piping systems intended for the supply of water under pressure up to and including 25 °C (cold water) intended for human consumption and for general purposes as well as for waste water under pressure. It is also applicable to pipes for the conveyance of water and waste water up to and including 45 °C and to a range of pipe sizes and pressure classes. It gives requirements concerning colours.

Replaced standards (2)
NF EN 1456-1
October 2001
Standard Cancelled
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system

Le présent document spécifie les aspects généraux des systèmes de canalisations en poly(chlorure de vinyle) non plastifié (PVC-U) dans le domaine de l'assainissement enterré et aérien avec pression.

NF EN 1452-2
November 1999
Standard Cancelled
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes

Le présent document précise les caractéristiques des tubes en poly(chlorure de vinyle) non plastifié (PVC-U). Il est applicable aux systèmes de canalisations pour l'alimentation en eau destinée à la consommation humaine, jusqu'à 45 °C inclus.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions, symboles et abréviations
    2
  • 4 Matière
    3
  • 4.1 Matière des tubes
    3
  • 4.2 Masse volumique
    3
  • 4.3 Valeur MRS
    3
  • 5 Caractéristiques générales
    3
  • 5.1 Aspect
    3
  • 5.2 Couleur
    3
  • 5.3 Opacité des tubes destinés au transport de l'eau en aérien
    3
  • 6 Caractéristiques géométriques
    3
  • 6.1 Mesurage des dimensions
    3
  • 6.2 Diamètres extérieurs nominaux
    3
  • 6.3 Diamètres extérieurs moyens et leurs tolérances
    4
  • 6.4 Épaisseur de la paroi et leurs tolérances
    5
  • 6.5 Longueur du tube
    6
  • 6.6 Tubes avec emboitures
    7
  • 6.7 Extrémités des tubes pour les assemblages collés et les assemblages à bague d'étanchéité
    11
  • 7 Classification et choix des tubes
    11
  • 7.1 Classification
    11
  • 7.2 Choix de la pression nominale PN et de la série S de tubes pour l'eau jusqu'à 25 °C inclus
    11
  • 7.3 Détermination de la pression de service admissible PFA pour de l'eau jusqu'à 45 °C
    11
  • 8 Caractéristiques mécaniques
    11
  • 8.1 Résistance aux chocs
    11
  • 8.2 Résistance à la pression interne
    12
  • 9 Caractéristiques physiques
    13
  • 10 Bagues d'étanchéité
    14
  • 11 Adhésifs
    14
  • 12 Exigences de performance
    14
  • 13 Marquage
    14
  • 13.1 Généralités
    14
  • 13.2 Marquage minimal exigé
    14
  • 13.3 Marquage supplémentaire
    15
  • Annexe A (normative) Pressions de service admissibles
    16
  • Annexe B (normative) Tubes en dimensions impériales (en pouces)
    18
  • Bibliographie
    23
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ