NF EN ISO 1461

NF EN ISO 1461

September 2022
Standard Current

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following: a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized; b) tube and pipe that are hot dip galvanized in automatic plants; c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document. NOTE      Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements. This document does not apply to after-treatment or additional coating of hot dip galvanized articles.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2022

Number of pages

24 p.

Reference

NF EN ISO 1461

ICS Codes

25.220.40   Metallic coatings

Classification index

A91-121

Print number

1

International kinship

European kinship

EN ISO 1461:2022
Sumary
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). This document does not apply to the following:

a) sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;

b) tube and pipe that are hot dip galvanized in automatic plants;

c) hot dip galvanized products (e.g. fasteners) for which specific standards exist and which can include additional requirements or requirements which are different from those of this document.

NOTE      Individual product standards can incorporate this document for the galvanized coating by quoting its number, or can incorporate it with modifications specific to the product. Different requirements can also be made for galvanized coatings on products intended to meet specific regulatory requirements.

This document does not apply to after-treatment or additional coating of hot dip galvanized articles.

Replaced standards (1)
NF EN ISO 1461
July 2009
Standard Cancelled
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

<p>ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following:</p> <ol> <li>sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;</li> <li>tube and pipe that are hot dip galvanized in automatic plants;</li> <li>hot dip galvanized products (e.g. fasteners) for which specific standards exist and which might include additional requirements or requirements which are different from those of ISO 1461:2009.</li> </ol> <p>After-treatment/over-coating of hot dip galvanized articles is not covered by ISO 1461:2009.</p>

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ