NF EN ISO 14644-1
Cleanrooms and associated controlled environments - Part 1 : classification of air cleanliness by particle concentration
ISO 14644-1:2015 specifies the classification of air cleanliness in terms of concentration of airborne particles in cleanrooms and clean zones; and separative devices as defined in ISO 14644‑7.Only particle populations having cumulative distributions based on threshold (lower limit) particle sizes ranging from 0,1 µm to 5 µm are considered for classification purposes.The use of light scattering (discrete) airborne particle counters (LSAPC) is the basis for determination of the concentration of airborne particles, equal to and greater than the specified sizes, at designated sampling locations.ISO 14644-1:2015 does not provide for classification of particle populations that are outside the specified lower threshold particle-size range, 0,1 µm to 5 µm. Concentrations of ultrafine particles (particles smaller than 0,1 µm) will be addressed in a separate standard to specify air cleanliness by nano-scale particles. An M descriptor (see Annex C) may be used to quantify populations of macroparticles (particles larger than 5 µm).ISO 14644-1:2015 cannot be used to characterize the physical, chemical, radiological, viable or other nature of airborne particles.
ISO 14644-1:2015 specifies the classification of air cleanliness in terms of concentration of airborne particles in cleanrooms and clean zones; and separative devices as defined in ISO 14644‑7.
Only particle populations having cumulative distributions based on threshold (lower limit) particle sizes ranging from 0,1 µm to 5 µm are considered for classification purposes.
The use of light scattering (discrete) airborne particle counters (LSAPC) is the basis for determination of the concentration of airborne particles, equal to and greater than the specified sizes, at designated sampling locations.
ISO 14644-1:2015 does not provide for classification of particle populations that are outside the specified lower threshold particle-size range, 0,1 µm to 5 µm. Concentrations of ultrafine particles (particles smaller than 0,1 µm) will be addressed in a separate standard to specify air cleanliness by nano-scale particles. An M descriptor (see Annex C) may be used to quantify populations of macroparticles (particles larger than 5 µm).
ISO 14644-1:2015 cannot be used to characterize the physical, chemical, radiological, viable or other nature of airborne particles.
Le présent document définit la classification de la propriété particulaire des salles propres et des espaces à empoussièrement maîtrisé pour les trois états d'occupation, "après construction", "au repos" ou "opérationnel". Il mentionne des recommandations quant aux conditions de conformité. Sont données en annexes normatives, d'une part, la détermination de la classification de la propreté particulaire à l'aide d'un compteur de particules et, d'autre part, le traitement statistique des données de concentration particulaire. En outre, des annexes informatives donnent une illustration graphique des classes, des exemples de calcul de la classification des indications sur le comptage et le mesurage des tailles particulaires et une procédure d'échantillonnage séquentiel.
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Classification
-
5 Démonstration de conformité
- Annexe A Méthode de référence pour la classe de propreté particulaire de l'air
- Annexe B Exemples d'application de calculs de classes
- Annexe C Comptage et mesurage de macroparticules en suspension dans l'air
- Annexe D Mode opératoire de prélèvement séquentiel
- Annexe E Spécification des classes décimales de propreté et des tailles de particules intermédiaires
- Annexe F Appareils de mesure
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ