NF EN ISO 14713-3
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3 : Sherardizing
ISO 14708-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a "duplex system".General guidance on this subject can be found in ISO 12944‑5 and EN 13438.The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of this document.Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.
ISO 14708-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a "duplex system".
General guidance on this subject can be found in ISO 12944‑5 and EN 13438.
The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of this document.
Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.
Le présent document fournit des lignes directrices et des recommandations concernant les principes généraux de conception appropriés pour les pièces à shérardiser pour leur protection contre la corrosion. La protection assurée par le revêtement de shérardisation appliqué sur la pièce dépend de la méthode d'application du revêtement, de la conception de la pièce et de l'environnement spécifique auquel la pièce est exposée. La pièce shérardisée peut également être encore plus protégée par l'application de revêtements supplémentaires (non couverts par le domaine d'application de la présente partie de l'ISO 14713) tels que des revêtements organiques (peintures humides ou revêtements poudre). Lorsqu'elle est appliquée aux pièces shérardisées, cette combinaison de revêtements est souvent appelée "système duplex". Des lignes directrices générales sur ce sujet sont données dans la NF ISO 12944-5 et la NF EN 13438. L'entretien de la protection contre la corrosion en service assurée pour l'acier par des revêtements shérardisés ne relève pas du domaine d'application de la présente partie de la NF ISO 14713. Des exigences spécifiques relatives aux produits (par exemple pour les revêtements shérardisés sur les tubes et les éléments de fixation, etc.) prévalent sur les présentes recommandations générales.
- Avant-propos
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Conception pour la shérardisation
-
5 Stockage et transport
-
6 Effets de l'état de la pièce sur la qualité de la shérardisation
-
7 Effet du procédé de shérardisation sur la pièce
-
8 Post-traitements
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ