NF EN ISO 15002

NF EN ISO 15002

September 2008
Standard Cancelled

Flow-metering devices for connection to terminal units of medical gas pipeline systems

ISO 15002:2008 is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases; flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators. ISO 15002:2008 is applicable to: flow-metering devices intended to be used with the following medical gases: oxygen; nitrous oxide; medical air; carbon dioxide; oxygen/nitrous oxide mixture [50 %/50 % (by volume)] specified mixtures of the gases listed above; flow-metering devices intended to be used with the following gases: oxygen-enriched air; helium; xenon.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2008

Number of pages

34 p.

Reference

NF EN ISO 15002

ICS Codes

11.040.10   Anaesthetic, respiratory and reanimation equipment
17.120.10   Flow in closed conduits

Classification index

S95-169

Print number

1 - 25/09/2008

International kinship

ISO 15002:2008

European kinship

EN ISO 15002:2008
Sumary
Flow-metering devices for connection to terminal units of medical gas pipeline systems

ISO 15002:2008 is applicable to:

  • flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases;
  • flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators.

ISO 15002:2008 is applicable to:

  • flow-metering devices intended to be used with the following medical gases:
    • oxygen;
    • nitrous oxide;
    • medical air;
    • carbon dioxide;
    • oxygen/nitrous oxide mixture [50 %/50 % (by volume)]
    • specified mixtures of the gases listed above;
  • flow-metering devices intended to be used with the following gases:
    • oxygen-enriched air;
    • helium;
    • xenon.
Replaced standards (1)
NF EN 13220
February 1999
Standard Cancelled
Flow-metering devices for connection to terminal units of medical gas pipeline systems.

Le présent document définit les caractéristiques de fonctionnement des dispositifs de mesure de débit utilisés dans les systèmes de distribution de gaz médicaux.

Standard replaced by (1)
NF EN 13220
February 1999
Standard Cancelled
Flow-metering devices for connection to terminal units of medical gas pipeline systems.

Le présent document définit les caractéristiques de fonctionnement des dispositifs de mesure de débit utilisés dans les systèmes de distribution de gaz médicaux.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    2
  • 4 Agencement de systèmes et dispositifs de contrôle du débit
    4
  • 5 Exigences générales
    4
  • 5.1 Sécurité
    4
  • 5.2 Autre conception
    4
  • 5.3 Matériaux
    5
  • 5.4 Exigences relatives à la conception
    6
  • 5.5 Exigences de construction
    11
  • 6 Méthodes d'essai
    11
  • 6.1 Généralités
    11
  • 6.2 Méthode d'essai de résistance mécanique
    12
  • 6.3 Méthode d'essai de fuites
    12
  • 6.4 Méthode d'essai de durabilité du marquage et du code couleur
    13
  • 7 Marquage, code couleur et emballage
    13
  • 7.1 Marquage
    13
  • 7.2 Code couleur
    14
  • 7.3 Emballage
    14
  • 8 Informations à fournir par le fabricant
    14
  • Annexe A (informative) Justificatif
    16
  • Annexe B (informative) Agencement de systèmes et de dispositifs de contrôle du débit
    18
  • Annexe C (informative) Aspects environnementaux
    21
  • Bibliographie
    22
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ