NF EN ISO 16120-1

NF EN ISO 16120-1

June 2017
Standard Current

Non-alloy steel wire rod for conversion to wire - Part 1 : general requirements

ISO 16120-1:2017 series is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.ISO 16120-1:2017 specifies general requirements for non-alloy steel wire rod for conversion to wire. It is not applicable to products for which standards exist or are in development, for example:- steel wire rod intended for heat treatment;- free-cutting steel wire rod;- steel wire rod for cold heading and cold extrusion;- steel wire rod intended for the production of electrodes and products for welding;- steel wire rod for welded fabric for reinforcement for concrete;- steel wire rod for ball and roller bearings (see ISO 683‑17);- steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.In addition to the requirements of this document, the general technical delivery requirements specified in ISO 404 apply.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2017

Number of pages

35 p.

Reference

NF EN ISO 16120-1

ICS Codes

77.140.65   Steel wire, wire ropes and link chains

Classification index

A35-051-1

Print number

2 - 01/09/2017

International kinship

ISO 16120-1:2017

European kinship

EN ISO 16120-1:2017
Sumary
Non-alloy steel wire rod for conversion to wire - Part 1 : general requirements

ISO 16120-1:2017 series is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.

ISO 16120-1:2017 specifies general requirements for non-alloy steel wire rod for conversion to wire. It is not applicable to products for which standards exist or are in development, for example:

- steel wire rod intended for heat treatment;

- free-cutting steel wire rod;

- steel wire rod for cold heading and cold extrusion;

- steel wire rod intended for the production of electrodes and products for welding;

- steel wire rod for welded fabric for reinforcement for concrete;

- steel wire rod for ball and roller bearings (see ISO 683‑17);

- steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.

In addition to the requirements of this document, the general technical delivery requirements specified in ISO 404 apply.

Replaced standards (1)
NF EN ISO 16120-1
November 2011
Standard Cancelled
Non-alloy steel wire rod for conversion to wire - Part 1 : general requirements

ISO 16120:2011 is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. ISO 16120-1:2011 covers general requirements and is not applicable to products for which standards exist or are in development, for example: steel wire rod intended for heat treatment; free-cutting steel wire rod; steel wire rod for cold heading and cold extrusion; steel wire rod intended for the production of electrodes and products for welding; steel wire rod for welded fabric for reinforcement for concrete; steel wire rod for ball and roller bearings (see ISO 683-17); steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs. In addition to the requirements of ISO 16120-1:2011, the general technical delivery requirements specified in ISO 404 apply.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Classification
  • 5 Informations à fournir par l'acheteur lors de la commande
  • 6 Processus de production
  • 7 Exigences
  • 8 Dimensions, masse et tolérances
  • 9 Contrôle
  • 10 Marquage
  • 11 Réclamations
  • Annexe A (normative) Détermination de la ségrégation axiale
  • Annexe D (normative) Détermination du pourcentage de perlite résolvable dans le fil machine à haute teneur en carbone
  • Annexe E (normative) Détermination du réseau de cémentite dans un fil machine à haute teneur en carbone
  • Annexe B (informative) Mesurage des défauts de surface
  • Annexe C (informative) Détérioration mécanique
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ