NF EN ISO 17072-2

NF EN ISO 17072-2

April 2011
Standard Cancelled

Leather - Chemical determination of metal content - Part 2 : total metal content

ISO 17072-2:2011 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA).This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals.The method is applicable for determining aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), potassium (K), selenium (Se), silicon (Si), sodium (Na), tin (Sn), titanium (Ti), zinc (Zn), and zirconium (Zr).The quantification limit of total lead is 8 mg/kg.ISO 17072-2:2011 is not applicable to chromium-tanned leathers. In this case, ISO 5398-1, or ISO 5398-2, or ISO 5398-3, or ISO 5398-4 are used.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2011

Number of pages

14 p.

Reference

NF EN ISO 17072-2

ICS Codes

59.140.30   Leather and furs

Classification index

G52-101-2

Print number

1 - 08/04/2011

International kinship

ISO 17072-2:2011

European kinship

EN ISO 17072-2:2011
Sumary
Leather - Chemical determination of metal content - Part 2 : total metal content

ISO 17072-2:2011 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA).

This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals.

The method is applicable for determining aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), potassium (K), selenium (Se), silicon (Si), sodium (Na), tin (Sn), titanium (Ti), zinc (Zn), and zirconium (Zr).

The quantification limit of total lead is 8 mg/kg.

ISO 17072-2:2011 is not applicable to chromium-tanned leathers. In this case, ISO 5398-1, or ISO 5398-2, or ISO 5398-3, or ISO 5398-4 are used.

Standard replaced by (1)
NF EN ISO 17072-2
April 2019
Standard Cancelled
Leather - Chemical determination of metal content - Part 2 : total metal content

This document specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Principe
    2
  • 4 Réactifs
    2
  • 5 Appareillage et matériel
    3
  • 6 Échantillonnage et préparation des échantillons
    3
  • 7 Mode opératoire instrumental
    4
  • 7.1 Analyse par ICP, AAS et SFA
    4
  • 7.2 Analyse par la technique à base d'hydrure
    5
  • 7.3 Analyse par la technique SFA
    5
  • 8 Calcul et expression des résultats
    5
  • 9 Rapport d'essai
    6
  • Annexe A (informative) Résultats de l'essai interlaboratoires
    7
  • Bibliographie
    8
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ