NF EN ISO 17633

NF EN ISO 17633

August 2006
Standard Cancelled

Welding consumables - Tubular cored electrodes and rods for arc welding with or without a gas shield of stainless and heat-resisting steels - Classification

ISO 17633:2004 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.ISO 17633:2004 is a combined standard providing for classification utilizing a system based upon classification according to nominal composition, or utilizing a system based upon classification according to alloy type.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2006

Number of pages

33 p.

Reference

NF EN ISO 17633

ICS Codes

25.160.20   Welding consumables

Classification index

A81-358

Print number

1 - 21/07/2006

International kinship

ISO 17633:2004

European kinship

EN ISO 17633:2006
Sumary
Welding consumables - Tubular cored electrodes and rods for arc welding with or without a gas shield of stainless and heat-resisting steels - Classification

ISO 17633:2004 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.

ISO 17633:2004 is a combined standard providing for classification utilizing a system based upon classification according to nominal composition, or utilizing a system based upon classification according to alloy type.

Replaced standards (1)
NF EN 12073
December 1999
Standard Cancelled
Wedlding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification

Le présent document spécifie les exigences de classification afin de désigner les fils fourrés destinés au soudage à l'arc avec ou sans gaz de protection des aciers inoxydables et réfractaires, en fonction de la composition du métal fondu hors dilution.

Standard replaced by (1)
NF EN ISO 17633
December 2010
Standard Cancelled
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification

ISO 17633:2010 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. ISO 17633:2010 is a combined standard providing for classification utilizing a system based upon nominal composition or utilizing a system based upon alloy type. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but ISO 17633:2010 does not use pulsed current for determining the electrode classification.

Table of contents
  • Avant-propos
    iv
  • Introduction
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Classification
    2
  • 4 Symboles et exigences
    3
  • 4.1 Symbole du produit et/ou procédé
    3
  • 4.2 Symbole de la composition chimique du métal fondu hors dilution
    3
  • 4.3 Symbole du type de fourrage des fils et baguettes fourrés
    13
  • 4.4 Symbole du gaz de protection
    13
  • 4.5 Symbole de la position de soudage
    14
  • 5 Essais mécaniques
    14
  • 5.1 Température de préchauffage et température entre passes
    15
  • 5.2 Séquence des passes
    15
  • 6 Analyse chimique
    16
  • 7 Essai pour soudures d'angle
    16
  • 8 Contre-essai
    17
  • 9 Conditions techniques de livraison
    18
  • 10 Exemples de désignation
    18
  • Annexe A (informative) Tableaux comparatifs des désignations des aciers d'après la composition nominale et d'après le type d'alliage
    19
  • Annexe B (informative) Description des types de fourrage des fils fourrés - Classification d'après la composition nominale
    20
  • Annexe C (informative) Description des types de fils fourrés et de baguettes fourrées - Classification d'après le type d'alliage
    21
  • Annexe D (informative) Considérations sur les teneurs de ferrite dans le métal fondu
    22
  • Bibliographie
    25
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ