NF EN ISO 17636-1

NF EN ISO 17636-1

March 2013
Standard Cancelled

Non-destructive testing of welds - Radiographic testing - Part 1 : X- and gamma-ray techniques with film

ISO 17636-1:2013 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques.ISO 17636-1:2013 applies to the joints of plates and pipes. Besides its conventional meaning, "pipe" as used in this International Standard covers other cylindrical bodies such as tubes, penstocks, boiler drums, and pressure vessels.ISO 17636-1:2013 does not specify acceptance levels for any of the indications found on the radiographs.If contracting parties apply lower test criteria, it is possible that the quality achieved is significantly lower than when ISO 17636-1:2013 is strictly applied.

See more
View the extract New: UPSELL service
Main informations

Collections

National standards and national normative documents

Publication date

March 2013

Number of pages

42 p.

Reference

NF EN ISO 17636-1

ICS Codes

25.160.40   Welded joints and welds
77.040.20   Non-destructive testing of metals

Classification index

A89-510-1

Print number

1 - 28/02/2013

International kinship

ISO 17636-1:2013

European kinship

EN ISO 17636-1:2013
Sumary
Non-destructive testing of welds - Radiographic testing - Part 1 : X- and gamma-ray techniques with film

ISO 17636-1:2013 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques.

ISO 17636-1:2013 applies to the joints of plates and pipes. Besides its conventional meaning, "pipe" as used in this International Standard covers other cylindrical bodies such as tubes, penstocks, boiler drums, and pressure vessels.

ISO 17636-1:2013 does not specify acceptance levels for any of the indications found on the radiographs.

If contracting parties apply lower test criteria, it is possible that the quality achieved is significantly lower than when ISO 17636-1:2013 is strictly applied.

Replaced standards (3)
NF EN 1435
October 1997
Standard Cancelled
Non-destructive examination of welds. Radiographic examination of welded joints.

Le présent document spécifie les techniques fondamentales du contrôle par radiographie des assemblages soudés par fusion des matériaux métalliques.

NF EN 1435/A1
June 2003
Standard Cancelled
Non-destructive examination of welds - Radiographic examination of welded joints

Le présent amendement a pour but principal d'ajouter l'annexe ZA relative aux directives UE 97/23/CE et 87/404/CEE.

NF EN 1435/A2
July 2004
Standard Cancelled
Non-destructive testing of welds - Radiographic testing of welded joints

Le présent document spécifie les techniques fondamentales du contrôle par radiographie des assemblages soudés par fusion des matériaux métalliques.

Standard replaced by (1)
NF EN ISO 17636-1
August 2022
Standard Current
Non-destructive testing of welds - Radiographic testing - Part 1 : X- and gamma-ray techniques with film

This document specifies techniques of radiographic testing of fusion-welded joints in metallic materials using industrial radiographic film techniques with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject. It applies to the joints of plates and pipes in metallic materials. Besides its conventional meaning, “pipe” as used in this document covers other cylindrical bodies, such as tubes, penstocks, boiler drums and pressure vessels. This document does not specify acceptance levels for any of the indications found on the radiographs. The ISO 10675 series provides information on acceptance levels for weld evaluation. If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
New: UPSELL service
- The UPSELL service allows you to easily update one of your standards.
- With a single click, add a new language, the Requirements or Redline+ service and add one or more additional users.
- Whether you are in the process of acquiring a standard or it is already available in your personal space, the UPSELL service is available at every stage to help you understand it and implement it within your organization.
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ