NF EN ISO 17872
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
This document describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 μm. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests.This document covers the scribing of metallic panels or test pieces (chemically treated or not) made from:— steel;— galvanized steel;— aluminium alloys;— magnesium alloys.It does not cover the scribing of electroplated metal or clad aluminium panels.
This document describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 μm. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests.
This document covers the scribing of metallic panels or test pieces (chemically treated or not) made from:
— steel;
— galvanized steel;
— aluminium alloys;
— magnesium alloys.
It does not cover the scribing of electroplated metal or clad aluminium panels.
ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests. ISO 17872:2007 covers the scribing of metallic panels or test pieces made from steel, chemically treated steel,aluminium or aluminium alloy, andchemically treated aluminium. It does not cover the scribing of galvanized or electroplated metal or clad aluminium panels.
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Rayures
-
5 Appareillage
-
6 Panneaux d'essai
-
7 Mode opératoire
-
8 Vérification de l'outil utilisé pour réaliser la rayure
-
9 Rapport
- Annexe A Outils utilisés pour effectuer les rayures
- Annexe B Exemples des différents résultats qu'il est possible d'obtenir lors d'un même essai de corrosion à l'aide de différents outils de rayure
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ