NF EN ISO 1874-1

NF EN ISO 1874-1

January 2011
Standard Cancelled

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system and basis for specification

ISO 1874-1:2010 establishes a system of designation for polyamide (PA) thermoplastic materials, which may be used as the basis for specifications.It covers polyamide homopolymers for moulding and extrusion based on PA 6, PA 66, PA 69, PA 610, PA 612, PA 11, PA 12, PA MXD6, PA 46, PA 1212, PA 4T, PA 6T and PA 9T and copolyamides of various compositions for moulding and extrusion.The types of polyamide plastic are differentiated from each other by a classification system based on appropriate levels of the designatory propertiesviscosity number,tensile modulus of elasticity andpresence of nucleating agent,and on information about chemical structure, intended application, method of processing, important properties, additives, colour, fillers and reinforcing materials.The designation system is applicable to all polyamide homopolymers and copolymers. It applies to materials ready for normal use, unmodified and modified by colorants, additives, fillers, reinforcing materials, polymer modifiers, etc.It does not apply to monomer casting-type polyamides of PA 6 and PA 12.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2011

Number of pages

21 p.

Reference

NF EN ISO 1874-1

ICS Codes

83.080.20   Thermoplastic materials

Classification index

T50-001-1

Print number

1 - 06/01/2011

International kinship

ISO 1874-1:2010

European kinship

EN ISO 1874-1:2010
Sumary
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system and basis for specification

ISO 1874-1:2010 establishes a system of designation for polyamide (PA) thermoplastic materials, which may be used as the basis for specifications.

It covers polyamide homopolymers for moulding and extrusion based on PA 6, PA 66, PA 69, PA 610, PA 612, PA 11, PA 12, PA MXD6, PA 46, PA 1212, PA 4T, PA 6T and PA 9T and copolyamides of various compositions for moulding and extrusion.

The types of polyamide plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties

  1. viscosity number,
  2. tensile modulus of elasticity and
  3. presence of nucleating agent,

and on information about chemical structure, intended application, method of processing, important properties, additives, colour, fillers and reinforcing materials.

The designation system is applicable to all polyamide homopolymers and copolymers. It applies to materials ready for normal use, unmodified and modified by colorants, additives, fillers, reinforcing materials, polymer modifiers, etc.

It does not apply to monomer casting-type polyamides of PA 6 and PA 12.

Replaced standards (1)
NF EN ISO 1874-1
December 2000
Standard Cancelled
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation

Standard replaced by (1)
NF EN ISO 16396-1
April 2015
Standard Cancelled
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system, marking of products and basis for specifications

ISO 16396-1:2015 establishes a system of designation for polyamide (PA) moulding and extrusion materials, which can be used as the basis for specifications. The types of polyamide plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) viscosity number and b) tensile modulus of elasticity and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials. The designation system is applicable to all polyamide homopolymers, copolymers, and blends. It applies to unmodified materials ready for normal use and materials modified, for example, by colorants, additives, fillers, reinforcing materials, and polymer modifiers. ISO 16396-1:2015 does not apply to the following materials: a) monomer casting-type polyamides of PA 6; b) monomer casting-type polyamides of PA 12.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Système de désignation
    2
  • 3.1 Généralités
    2
  • 3.2 Bloc de données 1
    2
  • 3.3 Bloc de données 2
    4
  • 3.4 Bloc de données 3
    5
  • 3.5 Bloc de données 4
    8
  • 3.6 Bloc de données 5
    9
  • 4 Exemples de désignations
    9
  • 4.1 Désignations uniquement
    9
  • 4.2 Désignation transformée en spécification
    11
  • Annexe A (normative) Définition et désignation des polyamides
    13
  • Bibliographie
    15
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ