NF EN ISO 19017

NF EN ISO 19017

October 2017
Standard Current

Guidance for gamma spectrometry measurement of radioactive waste

ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste. Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following: - raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning; - conditioned waste in various forms and matrices (bitumen, cement, hydraulic binder, etc.); - very low level (VLLW), low level (LLW), intermediate level (ILW) and high level radioactive waste (HLW); - different package shapes: cylinders, cubes, parallelepipeds, etc. Guidance is provided in respect of implementation, calibration, and quality control. The diversity of applications and system realizations (ranging from research to industrial systems, from very low level to high level radioactive waste, from small to large volume packages with different shapes, with different performance requirements and allowable measuring time) renders it impossible to provide specific guidance for all instances; the objective of this International Standard is, therefore, to establish a set of guiding principles. Ultimately, implementation is to be performed by suitably qualified and experienced persons and based on a thorough understanding of the influencing factors, contributing variables and performance requirements of the specific measurement application. This International Standard assumes that the need for the provision of such a system will have been adequately considered and that its application and performance requirements will have been adequately defined through the use of a structured requirements capture process, such as data quality objectives (DQO). It is noted that, while outside the scope of this International Standard, many of the principles, measurement methods, and recommended practices discussed here are also equally applicable to gamma measurements of items other than radioactive waste (e.g. bulk food, water, free-standing piles of materials) or to measurements made on radioactive materials contained within non-traditional packages (e.g. in transport containers).

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

October 2017

Number of pages

12 p.

Reference

NF EN ISO 19017

ICS Codes

17.240   Radiation measurements
27.120.30   Fissile materials and nuclear fuel technology

Classification index

M60-351

Print number

1

International kinship

ISO 19017:2015

European kinship

EN ISO 19017:2017
Sumary
Guidance for gamma spectrometry measurement of radioactive waste

ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste.

Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following:

- raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning;

- conditioned waste in various forms and matrices (bitumen, cement, hydraulic binder, etc.);

- very low level (VLLW), low level (LLW), intermediate level (ILW) and high level radioactive waste (HLW);

- different package shapes: cylinders, cubes, parallelepipeds, etc.

Guidance is provided in respect of implementation, calibration, and quality control. The diversity of applications and system realizations (ranging from research to industrial systems, from very low level to high level radioactive waste, from small to large volume packages with different shapes, with different performance requirements and allowable measuring time) renders it impossible to provide specific guidance for all instances; the objective of this International Standard is, therefore, to establish a set of guiding principles. Ultimately, implementation is to be performed by suitably qualified and experienced persons and based on a thorough understanding of the influencing factors, contributing variables and performance requirements of the specific measurement application.

This International Standard assumes that the need for the provision of such a system will have been adequately considered and that its application and performance requirements will have been adequately defined through the use of a structured requirements capture process, such as data quality objectives (DQO).

It is noted that, while outside the scope of this International Standard, many of the principles, measurement methods, and recommended practices discussed here are also equally applicable to gamma measurements of items other than radioactive waste (e.g. bulk food, water, free-standing piles of materials) or to measurements made on radioactive materials contained within non-traditional packages (e.g. in transport containers).

Replaced standards (1)
NF ISO 14850-1
September 2006
Standard Cancelled
Nuclear energy - Waste-packages activity measurement - Part 1 : high-resolution gamma spectrometry in integral mode with open geometry

<p>ISO 14850:2004 describes a procedure for measurements of gamma-emitting radionuclide activity in homogeneous objects such as unconditioned waste (including process waste, dismantling waste, etc.), waste conditioned in various matrices (bitumen, hydraulic binder, thermosetting resins, etc.), notably in the form of 100 L, 200 L, 400 L or 800 L drums, and test specimens or samples, (vitrified waste), and waste packaged in a container, notably technological waste. It also specifies the calibration of the gamma spectrometry chain. The gamma energies used generally range from 0,05 MeV to 3 MeV.</p>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Termes et définitions
  • 3 Application
  • 4 Équipement de mesurage
  • 5 Étalonnage
  • 6 Évaluation des données
  • 7 Assurance qualité
  • Annexe A (informative) Exemples d'application des techniques et méthodes présentées dans la présente Norme internationale
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ