NF EN ISO 19085-6

NF EN ISO 19085-6

December 2017
Standard Current

Woodworking machines - Safety - Part 6 : single spindle vertical moulding machines ("toupies")

ISO 19085-6:2017 gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as "machines", designed to cut wood and materials with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2017

Number of pages

67 p.

Reference

NF EN ISO 19085-6

ICS Codes

79.120.10   Woodworking machines

Classification index

E64-600-6

Print number

1

International kinship

ISO 19085-6:2017

European kinship

EN ISO 19085-6:2017
Sumary
Woodworking machines - Safety - Part 6 : single spindle vertical moulding machines ("toupies")

ISO 19085-6:2017 gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as "machines", designed to cut wood and materials with similar physical characteristics to wood.

NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.

It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.

NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.

Replaced standards (1)
NF EN 848-1+A2
November 2012
Standard Cancelled
Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Liste des phénomènes dangereux significatifs
  • 5 Exigences et mesures de sécurité pour les commandes
  • 6 Exigences et mesures de sécurité pour la protection contre les phénomènes dangereux mécaniques
  • 7 Exigences et mesures de sécurité pour la protection contre d'autres phénomènes dangereux
  • 8 Informations pour l'utilisation
  • Annexe B (normative) Essai de la fonction de freinage
  • Annexe C (normative) Essai de stabilité pour les machines transportables
  • Annexe D (normative) Essai de choc pour les protecteurs
  • Annexe E (normative) Mesures d'émission sonore pour les machines absentes de l'ISO 7960:1995
  • Annexe G (normative) Essai de rigidité pour les patins presseurs, les protecteurs de la main et les guides à lunette
  • Annexe A (informative) Niveau de performance requis
  • Annexe F (informative) Détermination des vitesses maximales d'arbre pour les mandrins monoblocs
  • Annexe ZA (informative) Relation entre la présente Norme européenne et les exigences essentielles concernées de la Directive 2006/42/CE
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ