NF EN ISO 19085-7
Woodworking machines - Safety - Part 7 : surface planing, thickness planing, combined surface/thickness planing machines
This document gives the safety requirements and measures for stationary and displaceable — surface planing machines, also called jointers, — thickness planing machines, also called planers or single surface planers, — combined surface/thickness planing machines with fixed cutterblock position, with an integrated feed in thicknessing mode, with or without demountable power feed device in planing mode and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The machines are designed to cut solid wood and material with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5. It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100. It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with. This document does not apply to: a) machines with more than one cutterblock; b) machines with mortising unit driven by a separate motor; c) machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode; d) machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units; e) machines where surfacing and thicknessing can be performed on the same section of the cutterblock at the same time; f) machines intended for use in potentially explosive atmosphere; g) machines manufactured before the date of its publication as an international standard; h) displaceable machines with a maximum planing width of ≤330 mm. NOTE 3 Transportable motor-operated electric tools are dealt with in IEC 62841‑1:2014 and IEC 61029‑2‑3:1993.
This document gives the safety requirements and measures for stationary and displaceable
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutterblock position, with an integrated feed in thicknessing mode, with or without demountable power feed device in planing mode and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The machines are designed to cut solid wood and material with similar physical characteristics to wood.
NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5.
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutterblock;
b) machines with mortising unit driven by a separate motor;
c) machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode;
d) machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surfacing and thicknessing can be performed on the same section of the cutterblock at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured before the date of its publication as an international standard;
h) displaceable machines with a maximum planing width of ≤330 mm.
NOTE 3 Transportable motor-operated electric tools are dealt with in IEC 62841‑1:2014 and IEC 61029‑2‑3:1993.
Le présent document détermine les exigences de sécurité des machines à dégauchir à avance manuelle. Le présent document donne les moyens de se conformer aux exigences de la Directive "Machines" 2006/42/CE.
Le présent document a été préparé dans le but de donner des moyens de se conformer aux exigences de la directive Machines 2006/42/CE. Il détermine les exigences de sécurité des machines à raboter sur une face, à chargement et déchargement manuel et à porte-outil fixe.
Le présent document a été préparé dans le but de donner des moyens de se conformer aux exigences de la Directive "Machines" 2006/42/CE. Il détermine les exigences de sécurité des machines combinées à raboter et à dégauchir.
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Liste des phénomènes dangereux significatifs
-
5 Exigences et mesures de sécurité pour les commandes
-
6 Exigences et mesures de sécurité pour la protection contre les phénomènes dangereux mécaniques
-
7 Exigences et mesures de sécurité pour la protection contre d'autres phénomènes dangereux
-
8 Informations pour l'utilisation
- Annexe A Niveaux de performances exigés
- Annexe B Essai de la fonction de freinage
- Annexe C Essai de stabilité pour les machines transportables
- Annexe D Essai de choc pour les protecteurs
- Annexe E Mesures d'émission sonore pour les machines absentes de l'ISO 7960:1995
- Annexe F Essais des protecteurs de type pont
- Annexe G Essai de résistance des lèvres de table des machines à dégauchir
- Annexe H Essai de rejet
- Bibliographie
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ