NF EN ISO 1927-6

NF EN ISO 1927-6

February 2013
Standard Current

Monolithic (unshaped) refractory products - Part 6 : measurement of physical properties

ISO 1927-6:2012 specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to ISO 1927-5:2012.The methods are applicable to dense and insulating castables and to ramming materials (including plastics) as defined in ISO 1927-1:2012 before and after firing.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

February 2013

Number of pages

19 p.

Reference

NF EN ISO 1927-6

ICS Codes

81.080   Refractories

Classification index

B40-003-6

Print number

1 - 19/04/2013

International kinship

ISO 1927-6:2012

European kinship

EN ISO 1927-6:2012
Sumary
Monolithic (unshaped) refractory products - Part 6 : measurement of physical properties

ISO 1927-6:2012 specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to ISO 1927-5:2012.

The methods are applicable to dense and insulating castables and to ramming materials (including plastics) as defined in ISO 1927-1:2012 before and after firing.

Replaced standards (1)
NF EN 1402-6
June 2004
Standard Cancelled
Unshaped refractory products - Part 6 : measurement of physical properties

La présente partie de cette Norme européenne spécifie des méthodes pour la détermination des propriétés de matériaux non façonnés à partir d'éprouvettes préparées et conservées conformément à l'EN 1402-5. Les méthodes sont applicables aux bétons denses et isolants et aux matériaux moulables (y compris les plastiques) tels que définis dans l'EN 1402-1, avant et après cuisson.

Table of contents
  • Avant-propos
    iv
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Détermination de la masse volumique géométrique apparente
    1
  • 3.1 Principe
    1
  • 3.2 Éprouvettes
    2
  • 3.3 Appareillage
    2
  • 3.4 Mode opératoire
    2
  • 3.5 Calcul et expression des résultats d'essai
    3
  • 4 Détermination de la masse volumique et de la porosité
    3
  • 4.1 Principe
    3
  • 4.2 Éprouvettes
    3
  • 4.3 Mode opératoire
    3
  • 4.4 Calcul
    3
  • 5 Détermination du module de rupture à froid
    3
  • 5.1 Principe
    3
  • 5.2 Éprouvettes
    4
  • 5.3 Appareillage et mode opératoire
    4
  • 5.4 Résultats d'essai
    4
  • 6 Détermination de la résistance à l'écrasement à froid
    4
  • 6.1 Principe
    4
  • 6.2 Éprouvettes
    4
  • 6.3 Appareillage
    5
  • 6.4 Mode opératoire
    5
  • 6.5 Calcul et expression des résultats
    7
  • 7 Détermination de la variation linéaire permanente
    8
  • 7.1 Principe
    8
  • 7.2 Appareillage
    8
  • 7.3 Mode opératoire
    8
  • 7.4 Calcul
    8
  • 8 Détermination du module de rupture à températures élevées
    9
  • 8.1 Principe
    9
  • 8.2 Appareillage et mode opératoire
    9
  • 8.3 Calcul et expression des résultats
    9
  • 9 Détermination de l'affaissement sous charge et du fluage en compression
    9
  • 9.1 Principe
    9
  • 9.2 Éprouvettes
    10
  • 9.3 Mode opératoire
    10
  • 9.4 Calcul et expression des résultats d'essai
    10
  • 10 Rapport d'essai
    10
  • Bibliographie
    11
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ