NF EN ISO 19879

NF EN ISO 19879

November 2010
Standard Cancelled

Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. ISO 19879:2010 does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 7241-2.Tests outlined in ISO 19879:2010 are independent of each other and document the method to follow for each test. See the appropriate component International Standard for which tests to conduct and for performance criteria.For qualification of the connector, the minimum number of samples specified in ISO 19879:2010 is tested, unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer and the user.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2010

Number of pages

28 p.

Reference

NF EN ISO 19879

ICS Codes

23.100.40   Piping and couplings

Classification index

E48-075

Print number

1 - 03/11/2010

International kinship

ISO 19879:2010

European kinship

EN ISO 19879:2010
Sumary
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. ISO 19879:2010 does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 7241-2.

Tests outlined in ISO 19879:2010 are independent of each other and document the method to follow for each test. See the appropriate component International Standard for which tests to conduct and for performance criteria.

For qualification of the connector, the minimum number of samples specified in ISO 19879:2010 is tested, unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer and the user.

Replaced standards (1)
NF EN ISO 19879
November 2005
Standard Cancelled
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

Le présent document spécifie des méthodes d'essai uniformes ainsi que l'évaluation des performances des raccords de tubes métalliques, des éléments mâles pour orifices et brides de raccordement destinés à être utilisés dans les applications de transmissions hydrauliques. Les essais sont indépendants les uns des autres et documentent la méthode à suivre pour chaque essai ; pour les exigences d'essai et les critères de performance, il faut se référer à la norme de composants appropriée.

Standard replaced by (1)
NF EN ISO 19879
March 2021
Standard Current
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

This document specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. This document does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 18869. Tests outlined in this document are independent of each other and document the method to follow for each test. See the appropriate component International Standard for indications of which tests to conduct and for performance criteria. For qualification of the connector, the minimum number of samples specified in this document is tested, unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer and the user.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Exigences générales
    2
  • 5 Essai d'assemblage répété
    6
  • 6 Essai d'étanchéité
    6
  • 7 Essai d'épreuve
    7
  • 8 Essai de rupture
    8
  • 9 Essai d'endurance cyclique
    9
  • 10 Essai de mise sous vide
    10
  • 11 Essai de serrage excessif
    10
  • 12 Essai de vibrations
    11
  • 13 Essai d'endurance (impulsion) cyclique avec vibrations
    14
  • 14 Phrase d'identification (Référence à la présente Norme internationale)
    15
  • Annexe A (normative) Formulaire de données d'essai
    16
  • Bibliographie
    19
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ