NF EN ISO 21003-3

NF EN ISO 21003-3

September 2008
Standard Current

Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : fittings

ISO 21003-3:2008 specifies the characteristics of fittings for multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water — whether or not the water is intended for human consumption (domestic systems) or for heating systems — under specified design pressures and temperatures appropriate to the class of applicationIt also specifies the test parameters for the test methods referred to in this part of ISO 21003.ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also to joints with components made of other plastics and non-plastics materials intended to be used for hot and cold water installations. ISO 21003-3 is intended for use only in conjunction with all the other parts of ISO 21003.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2008

Number of pages

20 p.

Reference

NF EN ISO 21003-3

ICS Codes

23.040.45   Plastics fittings
91.140.60   Water supply systems

Classification index

T54-952-3

Print number

1 - 25/09/2008

International kinship

ISO 21003-3:2008

European kinship

EN ISO 21003-3:2008
Sumary
Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : fittings

ISO 21003-3:2008 specifies the characteristics of fittings for multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water — whether or not the water is intended for human consumption (domestic systems) or for heating systems — under specified design pressures and temperatures appropriate to the class of application

It also specifies the test parameters for the test methods referred to in this part of ISO 21003.

ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also to joints with components made of other plastics and non-plastics materials intended to be used for hot and cold water installations. ISO 21003-3 is intended for use only in conjunction with all the other parts of ISO 21003.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    3
  • 4 Symboles et termes abrégés
    3
  • 5 Caractéristiques de la matière
    3
  • 5.1 Matières du raccord en plastique issues des normes de produits de référence
    3
  • 5.2 Matières du raccord en plastique autres que celles issues des normes de produits de référence
    3
  • 5.3 Matière des raccords métalliques
    4
  • 5.4 Influence sur l'eau destinée à la consommation humaine
    4
  • 6 Caractéristiques générales
    4
  • 6.1 Aspect
    4
  • 6.2 Opacité
    4
  • 7 Caractéristiques géométriques
    4
  • 7.1 Généralités
    4
  • 7.2 Dimensions des emboîtures pour raccords à emboîture soudable, par électrosoudage et collés au solvant
    5
  • 7.3 Dimensions des raccords métalliques
    5
  • 8 Caractéristiques mécaniques des raccords en plastique (essai de pression interne)
    5
  • 8.1 Généralités
    5
  • 8.2 Matières du raccord en plastique issues de la norme de produits de référence
    6
  • 8.3 Matières du raccord en plastique autres que celles issues de la norme de produits de référence
    6
  • 9 Caractéristiques physiques et chimiques des composants en plastique
    7
  • 9.1 Matières du raccord en plastique issues de la norme de produits de référence
    7
  • 9.2 Matières du raccord en plastique autres que celles issues de la norme de produits de référence
    7
  • 9.3 Éléments d'étanchéité
    7
  • 10 Exigences de performance
    7
  • 11 Marquage
    7
  • 11.1 Exigences générales
    7
  • 11.2 Marquage minimal exigé
    7
  • Annexe A (normative) Liste des normes de produits de référence
    9
  • Bibliographie
    10
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ