NF EN ISO 22007-4
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
ISO 22007-4:2017 specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the laser flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face. The method can be used for homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, α, in the range 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Measurements can be carried out in gaseous and vacuum environments over a temperature range from −100 °C to +400 °C. NOTE For inhomogeneous specimens, the measured values can be specimen thickness dependent.
ISO 22007-4:2017 specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the laser flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face.
The method can be used for homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, α, in the range 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Measurements can be carried out in gaseous and vacuum environments over a temperature range from −100 °C to +400 °C.
NOTE For inhomogeneous specimens, the measured values can be specimen thickness dependent.
<p>ISO 22007-4:2008 specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the laser flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face.</p> <p>The method can be used for homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, <i>α</i>, in the range 1 x 10<sup>-7</sup> m<sup>2</sup>s<sup>-1</sup> < <i>α</i> < 1 x 10<sup>-4</sup> m<sup>2</sup>s<sup>-1</sup>. Measurements can be carried out in gaseous and vacuum environments over a temperature range from -100 °C to +400 °C.</p> <p>For inhomogeneous specimens, the measured values may be specimen thickness dependent.</p>
<p class="MsoBodyText"><span lang="EN-GB">This document specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the light flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face.</span></p> <p class="MsoBodyText"><span lang="EN-GB">The method is applicable to homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, <em style="mso-bidi-font-style: normal;">α</em>, in the range 1 × 10<sup>−7</sup> m<sup>2</sup>⋅s<sup>−1</sup> < <em style="mso-bidi-font-style: normal;">α</em> < 1 × 10<sup>−4</sup> m<sup>2</sup>⋅s<sup>−1</sup>. Measurements can be carried out in gaseous and vacuum environments over a temperature range from −100 °C to +400 °C.</span></p> <p class="Note"><span lang="EN-GB">NOTE<span style="mso-tab-count: 1;"> </span>For inhomogeneous specimens, the measured values can be specimen thickness dependent.</span></p>
-
1 Domaine d'application
-
2 Références normatives
-
3 Termes et définitions
-
4 Principe
-
5 Appareillage
-
6 Éprouvette
-
7 Étalonnage et vérification
-
8 Mode opératoire
-
9 Analyse des données
-
10 Incertitude
-
11 Rapport d'essai
- Annexe A Correction relative à l'effet d'impulsion finie
- Annexe B Autres méthodes de calcul de la diffusivité thermique
- Annexe C Préparation des échantillons et de l'éprouvette pour les thermoplastiques moulables par injection et les plastiques thermodurcis
- Bibliographie
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.
For an overview of the service, click on View a standard in redline format
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ