NF EN ISO 22232-2

NF EN ISO 22232-2

September 2020
Standard Current

Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2 : probes

This document specifies the characteristics of probes used for non-destructive ultrasonic testing in the following categories with centre frequencies in the range of 0,5 MHz to 15 MHz, focusing or without focusing means: a) single- or dual-transducer contact probes generating longitudinal and/or transverse waves; b) single-transducer immersion probes. Where material-dependent ultrasonic values are specified in this document they are based on steels having a sound velocity of (5 920 ± 50) m/s for longitudinal waves, and (3 255 ± 30) m/s for transverse waves. This document excludes periodic tests for probes. Routine tests for the verification of probes using on-site procedures are given in ISO 22232-3. If parameters in addition to those specified in ISO 22232-3 are to be verified during the probe's life time, as agreed upon by the contracting parties, the procedures of verification for these additional parameters can be selected from those given in this document. This document also excludes ultrasonic phased array probes, therefore see ISO 18563-2.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

September 2020

Number of pages

66 p.

Reference

NF EN ISO 22232-2

ICS Codes

19.100   Non-destructive testing

Classification index

A09-320-2

Print number

1

International kinship

ISO 22232-2:2020

European kinship

EN ISO 22232-2:2020
Sumary
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2 : probes

This document specifies the characteristics of probes used for non-destructive ultrasonic testing in the following categories with centre frequencies in the range of 0,5 MHz to 15 MHz, focusing or without focusing means:

a) single- or dual-transducer contact probes generating longitudinal and/or transverse waves;

b) single-transducer immersion probes.

Where material-dependent ultrasonic values are specified in this document they are based on steels having a sound velocity of (5 920 ± 50) m/s for longitudinal waves, and (3 255 ± 30) m/s for transverse waves.

This document excludes periodic tests for probes. Routine tests for the verification of probes using on-site procedures are given in ISO 22232-3.

If parameters in addition to those specified in ISO 22232-3 are to be verified during the probe's life time, as agreed upon by the contracting parties, the procedures of verification for these additional parameters can be selected from those given in this document.

This document also excludes ultrasonic phased array probes, therefore see ISO 18563-2.

Replaced standards (1)
NF EN 12668-2
March 2010
Standard Cancelled
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes

Le présent document décrit les spécifications techniques à fournir par le constructeur des traducteurs utilisés en contrôle ultrasonore. Il concerne les catégories de traducteurs avec fréquences centrales dans la bande de fréquences 0,5 MHz à 15 MHz : traducteurs par contact, simples ou à émetteurs et récepteurs séparés et les traducteurs par immersion. Les essais périodiques des traducteurs ne sont pas inclus dans cette norme mais dans la norme NF EN 12668-3.

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Exigences générales de conformité
  • 6 Informations techniques sur les traducteurs
  • 7 Équipement de contrôle
  • 8 Exigences de performance des traducteurs
  • Annexe A Calcul de la longueur du champ proche des traducteurs non focalisés
  • Annexe B Bloc d'étalonnage pour traducteurs de faisceau d'angle
  • Annexe C Détermination de la ligne de retard et des retards de sabot
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ